The DLY Low Profile Linear Guide provides precise and stable linear motion in machinery where vertical installation space is limited. Its reduced assembly height helps create a more compact motion system and keeps the moving platform closer to the machine base.
DLY supplies this low-profile configuration through the ED series. EDH square blocks suit narrow mounting platforms, while EDW flange blocks provide a wider mounting surface for broader tables and alternative assembly layouts.
Available rail space, platform width, load direction and required rigidity should all be considered during selection. With the appropriate rail size, block form, preload, accuracy grade and block quantity, the guide can be configured for compact automation equipment, woodworking machinery, packaging systems, inspection equipment and auxiliary machine axes.
Product Structure
The circulating-ball structure provides smooth linear movement between the block and rail. A low block center and compact rail section help control the total height of the moving assembly. The ball retainer keeps the balls inside the block when it is removed from the rail, simplifying installation and maintenance.

The compact rail-and-block combination helps fit the motion system beneath low machine covers, tables and internal mechanisms.
A lower moving platform can reduce the distance between the applied load and guide mounting surface, helping improve system stability.
Square and flange block configurations allow the guide to match different platform widths, mounting directions and assembly methods.
EDH or EDW Block
EDH and EDW use the same low-profile design concept but serve different installation layouts. The choice should be based on the available mounting width and the way the moving platform is connected to the block.
| Block Form | Mounting Feature | Recommended When | Points to Confirm |
|---|---|---|---|
| EDH Square Block | Narrower block body with top mounting | The platform is narrow or lateral installation space is limited | Platform width, mounting screw access and block spacing |
| EDW Flange Block | Wider flange and larger mounting surface | The table is wider or a broader mounting interface is preferred | Available lateral space, mounting direction and interference clearance |
Complete EDH and EDW model dimensions, block options and technical data are available on the ED Square Guideway product page.
Specification Drawings
The drawings below show the available EDH and EDW low-profile block forms. When checking a drawing, pay particular attention to assembly height, block width, block length, mounting-hole position and the clearance required around the moving platform.
EDH Square Block
EDW Flange Block
Space Check
Selecting a low-profile guide should begin with the equipment envelope rather than the rail size alone. Confirm the following dimensions before comparing load ratings.
| Design Item | What to Check | Why It Matters |
|---|---|---|
| Assembly Height H | Distance from the rail mounting surface to the top of the block | Determines whether the guide fits beneath the moving table or machine cover |
| Block Width W | Available platform width and mounting-hole positions | Helps determine whether an EDH or EDW block is more suitable |
| Block Length L | Available space at both ends of the moving platform | Affects usable stroke, load distribution and interference clearance |
| Rail Spacing | Center distance between two parallel guide rails | Greater spacing can improve resistance to moment loads |
| Screw Access | Tool clearance above and around the block | Prevents the platform or adjacent components from obstructing installation |
Product Range
The table provides a general overview for initial configuration. Final selection should be checked against the required load, moment, service life, travel speed and installation accuracy.
| Product Series | DLY ED low-profile linear guide series |
| Block Forms | EDH square block and EDW flange block |
| Nominal Sizes | 15, 20, 25 and 30 |
| Accuracy Options | H and P are commonly selected; other requirements should be confirmed before ordering |
| Rail Length | Selected according to travel and installation length; custom cutting is available |
| Block Quantity | Confirmed according to the load, moment and mechanical layout |
Low Profile or Miniature
"Low profile" and "miniature" both describe compact products, but they do not solve exactly the same design problem.
| Guide Type | Main Priority | Typical Equipment | Selection Direction |
|---|---|---|---|
| Low Profile Guide | Lower assembly height with practical industrial load capacity | Compact automation, woodworking and packaging machinery | Choose when vertical installation height is the primary restriction |
| Miniature Guide | Minimum overall size and lightweight moving components | Small instruments, electronics and laboratory devices | Consider the MD Miniature Linear Guide when the entire motion system must be miniaturized |
Applications
Suitable for transfer, positioning and pick-and-place axes where sensors, actuators and covers leave limited vertical space.
Can be used in feeding, cutting-position adjustment and auxiliary movement mechanisms with restricted internal height.
Helps arrange motion stages below cameras, probes and measuring components without unnecessarily raising the inspection platform.
Applicable to compact pushing, guiding, sealing-position adjustment and material-handling mechanisms.
Suitable for guards, tool-setting mechanisms, feeding units and other secondary axes that require stable guidance in a limited envelope.
Supports controlled linear motion in assembly, handling and testing equipment where component density restricts installation space.
OEM Support

DLY can support low-profile guide selection according to machine drawings, installation space and operating conditions. Available services include:
- Rail cutting to the confirmed installation length
- Block quantity and arrangement confirmation
- Accuracy and preload selection support
- Replacement-model and mounting-dimension review
- OEM packaging and identification for confirmed orders
FAQ
Q: Should I select EDH or EDW?
A: EDH is generally considered when the moving platform is narrow or lateral space is limited. EDW has a wider flange and mounting surface, making it suitable for broader tables and different mounting arrangements. The final choice must also account for load, moment and screw access.
Q: Is a low-profile guide the same as a miniature guide?
A: No. A low-profile guide primarily reduces assembly height while retaining an industrial rail-and-block format. A miniature guide reduces the overall width, height and mass of the complete guide system for smaller instruments and devices.
Q: Can rail length be selected according to the required stroke?
A: Yes. Rail length can be selected according to the required travel and installation envelope. The calculation should include block length, block spacing, end safety allowance and the position of surrounding components.
Send us your installation drawing, required stroke, load and available assembly height for model confirmation.
Contact UsEmail: export@dlybearing.com
Hot Tags: low profile linear guide, China low profile linear guide manufacturers, suppliers, factory, vertical linear guide, Cross Roller Guide Way, linear slide rail guide, block for linear guides, cheap linear guide rails, linear guide rail block

