Exploring the production process of ball screw pairs

May 13, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

A ball screw may look like a screw shaft fitted with a nut, but its performance depends on a much more demanding manufacturing process. Lead accuracy, raceway geometry, surface hardness, preload and ball circulation must all be controlled before the assembly can convert rotary motion into stable linear movement.

The ball screw manufacturing process is not identical for every product. A rolled ball screw forms the shaft raceway by plastic deformation, while a ground ball screw creates its final raceway through precision grinding. The nut, return system, balls and shaft ends also require separate machining and inspection.

This article follows the principal production stages-from drawing review and material preparation to assembly and final testing-and explains how each stage affects the finished ball screw.

Production stage Main operation What must be controlled
1. Specification review Confirm dimensions and performance requirements Diameter, lead, length, accuracy, load, preload and end machining
2. Material preparation Cut and prepare shaft and nut blanks Material grade, straightness, defects and machining allowance
3. Raceway formation Roll or grind the shaft raceway; machine the nut raceway Lead, groove profile, pitch diameter and surface condition
4. Heat treatment Harden the rolling-contact surfaces Surface hardness, effective case depth and distortion
5. Finish machining Finish raceways, journals, shoulders and threads Runout, concentricity, surface finish and mounting dimensions
6. Assembly Install balls, return components, seals and lubricant Ball circulation, preload, axial clearance and smooth movement
7. Inspection Measure dimensions and functional performance Travel accuracy, torque, backlash, noise and traceability

1. Specification Review

Manufacturing begins before any metal is cut. The required screw shaft diameter, nominal lead, threaded length, total length, nut configuration, mounting interface and shaft-end geometry must first be defined.

Performance requirements are equally important. The manufacturer needs to know the required positioning accuracy, axial load, speed, service life, rigidity and permissible axial clearance. These conditions influence the production route, accuracy grade, ball size, number of loaded circuits and preload method.

End machining should also be confirmed at this stage. Bearing journals, shoulders, retaining threads, keyways and coupling seats must match the selected support units and motor connection. An accurately produced raceway cannot compensate for incorrectly specified mounting ends.

2. Raw Material Preparation

The screw shaft and nut are prepared as separate blanks because they perform different functions and may require different materials or heat-treatment responses. At DLY, S55C is commonly used for ball screw shafts, while 20CrMo is used for nuts. The actual material must still be selected according to the product design and operating requirements.

Incoming material is checked for its grade, dimensions, surface defects and basic straightness. Bars and forgings are then cut with sufficient allowance for turning, heat-treatment deformation and final finishing.

Preliminary turning establishes reference surfaces and removes excess material. Depending on the material condition and production route, stress-relief treatment may be used to reduce residual stress before high-accuracy machining. This helps limit distortion in subsequent operations.

3. Screw Shaft Raceway Formation

The helical groove on the screw shaft forms one side of the ball raceway. Its lead, profile, pitch diameter and consistency directly affect travel accuracy, load distribution and running torque. Two common manufacturing routes are rolling and grinding.

Rolled Ball Screw Production

In thread rolling, hardened dies press against the shaft blank and displace the material plastically to form the helical groove. Material is moved rather than removed. This method offers high production efficiency and is widely used for standard industrial ball screws.

Rolling parameters such as die position, pressure, feed and blank diameter must be controlled to maintain the required groove profile and lead. The shaft may then undergo heat treatment, straightening and surface finishing according to the specified production plan.

DLY commonly supplies cold-rolled C7 ball screws for general CNC equipment, automation systems, packaging machinery and other applications where reliable positioning and economical production are both important.

Ground Ball Screw Production

For a ground ball screw, the shaft is first rough-machined and heat-treated. The hardened raceway is then finished with a precision thread-grinding machine. Grinding removes a controlled amount of material to establish the final groove geometry and lead accuracy.

Temperature control is especially important during precision grinding. Heat generated at the contact zone can affect dimensions, while ambient temperature changes can influence long-axis measurement. Grinding-wheel condition, machine alignment and measurement feedback must therefore be managed throughout the process.

DLY ground ball screws can be produced to C5 accuracy for equipment requiring tighter positioning control. The required accuracy should be determined from actual machine travel and positioning needs rather than from the manufacturing method alone.

Item Rolled screw shaft Ground screw shaft
Raceway formation Plastic deformation with rolling dies Material removal with precision grinding
Typical process position Groove is generally formed before final hardening and finishing Final groove is ground after hardening
Production characteristic Efficient for standard-volume production More machining and measurement time
DLY common accuracy C7 C5

The exact sequence can vary with material, hardening method, screw dimensions and the manufacturer's process design. "Rolled" and "ground" describe how the screw raceway is produced; they do not by themselves define every feature of the completed assembly.

4. Ball Nut Manufacturing

The ball nut is not simply a threaded sleeve. It contains an internal helical raceway and a return system that guides each ball from the end of one loaded circuit back to its starting point.

Nut production generally includes blank preparation, turning, drilling of mounting and lubrication features, internal raceway machining, return-path machining, heat treatment and finish processing. Flange dimensions and mounting-hole positions must be controlled because they determine how the nut is located on the machine table or nut housing.

Internal return, end-cap return and external return-tube designs require different machining and assembly operations. Regardless of the design, the transition between the loaded raceway and return path must allow the balls to circulate without impact, jamming or abnormal noise.

5. Heat Treatment and Straightening

The screw and nut raceways repeatedly carry concentrated contact loads. Their working surfaces therefore require sufficient hardness and hardened depth to resist wear and contact fatigue, while the component core must retain suitable toughness.

Heat-treatment temperature, heating depth, cooling conditions and tempering must be controlled according to the material and design. Inspection may include surface-hardness measurement, hardened-layer verification and metallographic examination on process samples.

Heating and cooling can cause a long screw shaft to bend. Straightness is checked after heat treatment, and controlled straightening is performed when necessary. Excessive correction can introduce new residual stress, so straightening must be carried out together with repeated runout measurements.

6. Raceway and Shaft-End Finishing

After hardening, the raceway and reference surfaces receive the finishing operations required by the selected production route. Ground screws undergo precision thread grinding, while rolled screws may receive straightening, polishing or other finishing operations without turning the rolled groove into a ground groove.

Shaft ends are machined for fixed and supported bearings, locknuts and motor couplings. Important features include bearing-seat diameter, shoulder position, thread dimensions, surface finish and concentricity with the screw raceway.

Poor journal concentricity can produce vibration and cyclic loading even when the raceway itself is accurate. End machining must therefore be inspected as part of the functional ball screw assembly, not treated as an unrelated secondary operation.

7. Ball Selection and Assembly

Before assembly, the screw shaft, nut, balls and return components are cleaned to remove abrasive particles, chips and processing residues. Contamination introduced at this stage can damage the finished raceways during the first operating cycles.

Precision balls are selected by diameter grade and matched to the measured raceway condition. They are loaded into the nut circuits, after which return components, seals or wipers are installed. The nut is then transferred onto the screw shaft with an assembly sleeve or another controlled method to prevent the balls from escaping.

Lubricant is applied in the specified quantity and the nut is moved through its usable travel. This confirms that the balls pass smoothly through both the loaded grooves and return path.

8. Preload and Axial Clearance

Ball size and raceway matching determine the initial axial clearance or preload. Depending on the nut design, preload may be established through oversized balls, an offset-pitch structure, spacers or a double-nut arrangement.

Preload removes or reduces axial play and increases rigidity, but more is not automatically better. Excessive preload raises friction torque, heat generation and internal contact stress. Insufficient preload may allow lost motion under reversing loads.

The correct target must therefore be based on positioning behavior, rigidity, speed, temperature and expected service life. The assembled nut is checked for both axial movement and torque consistency rather than being judged only by how tightly it fits the shaft.

9. Final Inspection

Final inspection connects the manufacturing process to actual ball screw performance. The inspection plan depends on the accuracy grade, dimensions, nut type and customer requirements.

Inspection item Purpose Possible problem detected
Lead and travel measurement Verify linear travel produced by shaft rotation Cumulative lead error or local travel variation
Axial clearance Confirm backlash or preload condition Incorrect ball matching or preload adjustment
Dynamic torque Evaluate resistance through the working stroke Local tight spots, return-path interference or contamination
Shaft runout Check straightness and reference-surface alignment Heat-treatment distortion or inaccurate end machining
Hardness and hardened depth Verify raceway heat treatment Insufficient hardening or inconsistent treatment
Noise and circulation check Confirm stable ball return Return-component defects, debris or damaged balls

ISO 3408 provides internationally recognized terminology and acceptance concepts for ball screws. The applicable inspection items and tolerances should be stated clearly on the drawing, purchase specification or inspection agreement rather than assumed from a general product description.

10. Cleaning, Preservation and Traceability

A finished ball screw must remain clean after inspection. Exposed surfaces are protected against corrosion, and the assembly is packaged to prevent impact, contamination and bending during transport. Long shafts require suitable support inside the package.

Product identification should connect the assembly with its material, heat-treatment, processing and inspection records. This traceability is important when confirming a custom specification or investigating a performance issue after installation.

How Manufacturing Affects Performance

No single operation determines ball screw quality. Final performance results from the interaction of raceway accuracy, surface integrity, hardened depth, shaft straightness, nut geometry, ball matching, circulation design and assembly cleanliness.

  • Positioning accuracy depends mainly on lead control and measurement over the effective travel.
  • Rigidity and backlash are influenced by raceway geometry, ball selection and preload.
  • Smooth running requires consistent grooves, accurate ball circulation and clean assembly.
  • Service life depends on material quality, heat treatment, load distribution, lubrication and operating conditions.
  • High-speed stability is affected by shaft straightness, mounting-journal accuracy, balance and return-system design.

Conclusion

The complete ball screw production process includes specification review, material preparation, raceway formation, heat treatment, precision finishing, nut manufacture, ball loading, preload adjustment and final inspection. Rolled and ground ball screws follow different raceway-production routes, but both require coordinated control of the shaft, nut, balls and return system.

When ordering a standard or custom ball screw, clearly defined accuracy, load, speed, preload and end-machining requirements allow the manufacturer to select an appropriate and verifiable production route.

FAQ

How are ball screw threads manufactured?

The screw shaft raceway is commonly produced by thread rolling or precision grinding. Rolling forms the groove through plastic deformation, while grinding removes material from a hardened shaft to produce the final groove geometry.

Is every ball screw raceway ground after heat treatment?

No. Precision ground ball screws receive final thread grinding after hardening. A rolled ball screw retains a raceway formed by rolling and may undergo subsequent heat treatment, straightening and surface finishing without becoming a ground ball screw.

Why does a ball screw need heat treatment?

Heat treatment gives the rolling-contact surfaces the hardness and hardened depth needed to resist wear and contact fatigue. The selected process must also control distortion and preserve sufficient core toughness.

How is ball screw preload created?

Preload can be produced through selected ball diameters, an offset-pitch nut, spacers or a double-nut structure. The method depends on the nut design and required rigidity, torque and axial-clearance characteristics.

What information is needed before manufacturing a custom ball screw?

Important information includes shaft diameter, lead, total and threaded lengths, accuracy grade, nut type, preload or axial-clearance requirement, end-machining drawing, load, speed and operating environment.

References

  • ISO 3408, Ball screws-terminology, acceptance conditions and related specifications.
  • General engineering principles for rolled and ground ball screw production, heat treatment, assembly and inspection.

Ball screw specification support

For assistance with C7 rolled ball screws, C5 ground ball screws, preload or custom shaft-end machining, contact DLY at export@dlybearing.com .

← Back to DLY Blog

Send Inquiry