How Are Custom Ball Screws Customized for Different Applications?

Oct 06, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

A custom ball screw is not simply a standard screw cut to a different length. Its diameter, lead, accuracy grade, preload, nut configuration, end machining, lubrication and protective measures must work together under the actual load, speed, stroke and installation conditions of the machine.

For example, increasing the lead can raise linear travel per revolution, but it also changes the required drive torque, rotational speed and positioning resolution. Increasing the screw diameter improves rigidity and buckling resistance, but adds inertia and requires more installation space. Effective ball screw customization therefore begins with operating data rather than a model number alone.

This guide explains which ball screw parameters can be customized, how requirements vary between applications and what information should be supplied before manufacturing begins.

The main customization decisions

A complete specification normally covers screw diameter and lead, effective stroke, overall length, accuracy grade, axial clearance or preload, nut type, shaft-end dimensions, mounting arrangement, lubrication, sealing and operating environment.

Start with Operating Conditions

Selecting a customized ball screw should begin with the motion and load requirements of the complete axis. A drawing may define the available space, but it does not show whether the screw will operate safely at the required speed or provide the expected service life.

Required information Why it matters Related customization
Axial load and load direction Affects load capacity, service life, rigidity and buckling checks Diameter, nut type, preload and support arrangement
Maximum linear speed Determines the required screw speed and influences critical-speed checks Lead, diameter, overall length and supports
Stroke and unsupported length Long screws have greater risks of vibration, whipping and compression buckling Shaft diameter and bearing arrangement
Positioning accuracy and repeatability Defines whether lead accuracy, compensation and preload are required Rolled or ground screw, accuracy grade and preload
Duty cycle and acceleration Influences heat generation, inertia, lubrication and calculated life Lead, nut design and lubrication method
Dust, moisture and temperature Contamination and unsuitable lubrication can shorten operating life Wipers, covers, grease and corrosion protection

Ball Screw Parameters That Can Be Customized

Diameter and lead

Screw diameter is selected according to axial load, unsupported length, rigidity and operating speed. A larger diameter generally improves axial stiffness and resistance to buckling, but it also increases rotating mass and space requirements.

Lead is the linear distance travelled by the nut during one revolution of the screw. A smaller lead supports finer command resolution and higher mechanical advantage, while a larger lead allows higher linear travel at the same motor speed. The final choice must also consider torque, acceleration and permissible screw speed.

Length and effective stroke

Overall screw length includes more than the machine stroke. Space is also required for the nut body, safety overtravel, seals and machined bearing or coupling seats. For long screws, the design should be checked for critical speed and buckling instead of extending a standard drawing without calculation.

Accuracy and axial clearance

DLY commonly supplies C7 rolled ball screws for general automation and C5 ground ball screws for applications requiring higher positioning accuracy. Accuracy grade should not be selected from repeatability alone: lead deviation, mounting accuracy, thermal growth, bearing rigidity and control compensation all influence the final positioning result.

Axial clearance can be controlled through ball selection or a preloaded nut arrangement. Preload increases axial rigidity and reduces lost motion, but excessive preload raises friction, drive torque and heat. It should therefore match the actual reversing accuracy and rigidity requirement.

Nut configuration

The nut may be customized as a single nut, double nut, flanged nut, cylindrical nut or compact nut according to the available mounting space and required rigidity. Flange dimensions, bolt-hole positions, lubrication ports and wiper arrangements should be confirmed against the machine housing before production.

Shaft-end machining

Shaft ends connect the ball screw to its support bearings, locknut and motor coupling. Custom machining can include bearing journals, shoulders, external or internal threads, wrench flats, keyways and coupling seats. Concentricity between the machined journals and the screw axis is especially important for smooth rotation.

Standard BK/BF, FK/FF or EK/EF support units can be matched when their dimensions suit the axis. A customer drawing is preferable when the machine uses an existing bearing housing or non-standard motor connection.

Lubrication and protection

Grease type, relubrication interval and sealing should reflect the operating speed, temperature and surrounding contaminants. Bellows, telescopic covers or other external protection may still be required because nut wipers alone cannot isolate a ball screw from heavy chips, abrasive dust or direct coolant flow.

Customization for Different Applications

CNC machine tools

CNC feed axes usually prioritize rigidity, controlled axial clearance and predictable lead accuracy. The specification may require a ground screw, preloaded nut, larger shaft diameter and fixed bearing arrangement. Machining forces, acceleration and thermal growth should be evaluated together rather than selecting the screw from positioning accuracy alone.

Custom ball screw used in CNC machine applications

Industrial robots

Robot and handling axes commonly require rapid acceleration, compact installation and frequent reversing. A moderate screw diameter, suitable lead, low-inertia design and properly controlled preload help balance response speed with rigidity. Noise should be addressed through correct alignment, lubrication and ball circulation design rather than by specifying preload alone.

Ball screw customization for industrial robots

Aerospace-related equipment

Ground support, testing and specialized aerospace equipment may impose strict requirements for weight, vibration, temperature and traceability. These projects require application-specific engineering review. Material, coating and lubricant choices should be validated against the specified environment rather than assumed from general aerospace terminology.

Customized ball screw for aerospace-related equipment

New energy and battery equipment

Battery assembly, lifting and material-transfer equipment can combine high axial loads with long production cycles. Diameter, nut load capacity, mounting orientation and holding safety must be checked carefully. Where a vertical axis is involved, the machine also requires a suitable motor brake or independent safety mechanism because a ball screw can back-drive.

Custom ball screw for new energy production equipment

Medical equipment

Medical positioning and diagnostic equipment may value smooth motion, low noise, compact dimensions and controlled lubrication. However, suitability cannot be determined from the ball screw alone. Cleanability, lubricant compatibility, maintenance access and regulatory requirements must be assessed as part of the complete equipment design.

Custom ball screw in medical positioning equipment

Semiconductor and electronics equipment

Electronics assembly, inspection and handling systems often require low friction, precise reversing motion and limited particle generation. Preload, lubrication quantity, sealing and component cleanliness may need tighter control. Cleanroom compatibility should be confirmed for the complete assembly and lubricant, not inferred solely from the screw's accuracy grade.

Ball screw customization for electronics manufacturing equipment

Woodworking and packaging machines

Woodworking dust, packaging debris and frequent operating cycles place greater emphasis on protection and maintenance. A suitable lead supports the required cycle speed, while external covers and planned relubrication help protect the raceway. For long travel, screw speed and support spacing should be checked before finalizing the diameter.

Custom ball screw for woodworking and packaging machinery

Marine and humid environments

Humid or salt-containing environments require a specific corrosion-protection plan. The screw material or surface treatment, nut components, bearings, fasteners and lubricant should be reviewed as one system. Corrosion-resistant treatment can improve environmental resistance, but it does not make an exposed ball screw maintenance-free.

Corrosion-resistant ball screw for humid environments

General industrial automation

Assembly, dispensing, testing and transfer systems usually need a practical balance of cost, speed, repeatability and maintenance. A C7 rolled screw may be appropriate for many general automation axes, while higher accuracy or preload should be specified only when the positioning and rigidity requirements justify them.

Custom ball screw for industrial automation lines

Custom Ball Screw Specification Checklist

Supplying complete operating information reduces repeated drawing revisions and helps identify unsuitable combinations before manufacturing. A useful inquiry should include:

  • Screw diameter, lead and preferred nut series, if already known
  • Total length, effective stroke and installation orientation
  • Maximum, average and peak axial loads
  • Maximum linear speed, acceleration and duty cycle
  • Required positioning accuracy, repeatability and axial clearance
  • Fixed and supported bearing arrangement
  • Shaft-end drawing with dimensions, tolerances and thread details
  • Operating temperature, dust, coolant, moisture or cleanroom conditions
  • Lubrication method and expected maintenance interval
  • Required quantity and any inspection or documentation requirements

Drawing note: When replacing an existing ball screw, provide the complete screw-and-nut drawing rather than only the old model number. Nut flange holes, lubrication ports, shaft-end fits and effective travel can differ even when the nominal diameter and lead are the same.

FAQ

Can a standard ball screw be supplied with custom shaft ends?

Yes. A standard screw and nut combination can often be supplied with shaft ends machined to the customer's support-bearing and coupling dimensions. Feasibility depends on the required journal sizes, threads, shoulders and available unthreaded shaft length.

Does a custom ball screw always require a ground screw?

No. C7 rolled ball screws are suitable for many automation, handling and general machine applications. Ground screws are normally considered when tighter lead accuracy, smoother precision positioning or a specific machine-tool requirement makes them necessary.

Can a ball screw be manufactured from an existing sample?

A sample can help identify dimensions, but a verified drawing is still recommended. Wear on an old screw or nut may make measured clearance and critical dimensions unreliable. Operating load, speed and accuracy requirements should also be supplied.

What must be checked for a long custom ball screw?

The manufacturer should check critical speed, compression buckling, support spacing, alignment, screw tensioning where applicable and the required linear speed. Increasing length without reviewing these factors can cause vibration or unstable motion.

Can DLY match an existing ball screw drawing?

DLY can review an existing drawing and confirm manufacturability, suitable nut configuration, accuracy grade and shaft-end machining. Final interchangeability should be confirmed from all mounting dimensions and tolerances, not from the model designation alone.

Conclusion

Effective ball screw customization connects the machine's operating requirements with a manufacturable screw-and-nut design. Diameter, lead, accuracy, preload, nut configuration, end machining, supports and lubrication should be evaluated together because changing one parameter can affect speed, torque, rigidity and service life.

A complete drawing and operating-condition sheet allow the manufacturer to check the proposed design before production and provide a custom ball screw that fits both the machine structure and the intended duty.

References

  • ISO 3408-2:2021, Ball screws-nominal diameters, leads, nut dimensions and mounting bolts.
  • ISO 3408-3:2006, Ball screws-acceptance conditions and acceptance tests.
  • ISO 3408-4:2006, Ball screws-static axial rigidity.
  • ISO 3408-5:2006, Ball screws-static and dynamic axial load ratings and operational life.

Need a custom ball screw drawing reviewed?

Send the required diameter, lead, stroke, load, speed, accuracy and shaft-end drawing for technical confirmation.

 Email: export@dlybearing.com

← Back to DLY Blog

Send Inquiry