DLY large lead ball screws are designed for linear motion systems that require greater travel with each screw revolution. They are commonly used in rapid positioning, long-stroke transfer and automated equipment where movement speed and cycle time are more important than fine feed resolution.
The term "large lead" refers to the axial distance travelled by the nut during one complete revolution of the screw. It does not mean that the screw must have a particularly large diameter or that it is intended only for heavy-load applications. DLY large lead options include ball screws with leads from 10 mm to 64 mm in the current standard product range.
DLY supplies SFE, SFU and selected double-nut large lead configurations. Screw length, shaft-end machining, accuracy grade, axial clearance and matching ball screw supports can be confirmed according to the speed, load, stroke and installation requirements.
Large Lead Screw Definition
Lead is the distance that the ball nut moves along the screw shaft during one complete screw revolution. For example, a 20 mm lead ball screw moves the nut 20 mm per revolution, while a 5 mm lead ball screw moves it only 5 mm per revolution.
At 1,000 rpm, a 20 mm lead produces a theoretical linear speed of 20,000 mm/min. Under the same conditions, a 5 mm lead produces 5,000 mm/min. The 20 mm lead therefore provides four times the linear travel at the same rotational speed.
There is no single international value that separates a standard lead from a large lead. The description depends on the relationship between screw diameter and lead. A 10 mm lead may be considered relatively large for a 16 mm diameter screw, while a 10 mm lead is a conventional configuration for a much larger diameter.
SFE models provide a clearer large-lead configuration because their lead is generally equal to or twice the nominal screw diameter. Examples include 16 × 16 mm, 20 × 40 mm, 25 × 50 mm and 32 × 64 mm. These diameter-to-lead combinations are intended for fast linear movement rather than simply increasing screw size.
Standard DLY Large Lead Ball Screw Models
DLY's regular large lead range is centered on the SFE flanged single-nut series. Additional SFU and double-nut configurations are available for applications requiring a different nut structure or diameter range.
| Series | Diameter × Lead | Regular Models | Structure |
|---|---|---|---|
| SFE | 16 × 16 mm | SFE1616-3, SFE1616-6 | Flanged single nut with internal ball circulation |
| 16 × 32 mm | SFE1632-3, SFE1632-6 | ||
| 20 × 20 mm | SFE2020-3, SFE2020-6 | ||
| 20 × 40 mm | SFE2040-3, SFE2040-6 | ||
| 25 × 25 mm | SFE2525-3, SFE2525-6 | ||
| 25 × 50 mm | SFE2550-3, SFE2550-6 | ||
| 32 × 32 mm | SFE3232-3, SFE3232-6 | ||
| 32 × 64 mm | SFE3264-3, SFE3264-6 | ||
| 40 × 40 mm | SFE4040-3, SFE4040-6 | ||
| 50 × 50 mm | SFE5050-3, SFE5050-6 | ||
| SFU | 10 mm and 20 mm leads | SFU1610, SFU2010, SFU2510, SFU3210, SFU4010, SFU5010, SFU5020, SFU6310, SFU6320, SFU8010, SFU8020 and SFU10020 | Standard flanged single nut |
| DFI | 10 mm and 20 mm leads | DFI 10 mm lead configurations | Double-nut configuration |
SFE Large Lead Configurations
The SFE series is the primary choice when the lead is equal to or greater than the nominal screw diameter. Its compact flanged single-nut structure is suitable for automation systems requiring rapid travel and efficient installation.
Each diameter is available with different lead options. For example, the 20 mm diameter series includes both SFE2020 and SFE2040. SFE2020 travels 20 mm per revolution, while SFE2040 travels 40 mm per revolution. The higher-lead option provides twice the linear speed at the same screw rpm.
The "-3" and "-6" suffixes do not indicate different leads. They identify different ball-circuit configurations. The -6 version generally provides higher load ratings and rigidity than the corresponding -3 version, while retaining the same nominal diameter and lead.
SFU and Double-Nut Large Lead Options
SFU is a standard flanged single-nut series. Some SFU models are available with 10 mm or 20 mm leads, providing a large-lead option while retaining the familiar SFU mounting structure. This is useful when the equipment design already uses an SFU nut interface.
DFE and selected DFI configurations use a double-nut structure. They are intended for systems requiring greater axial rigidity and more controlled backlash. Because the double-nut body is longer than a single nut, the available installation space must be confirmed before selection.
Some DFI large-lead nuts are supplied as customized configurations rather than regular stock products. Availability, minimum order quantity, nut dimensions and production time must therefore be confirmed for the specific model.
Large Lead Screw Advantages
More travel is produced with each screw revolution, making large lead ball screws suitable for rapid movement and shorter cycle times.
The same feed speed can be achieved at a lower rotational speed than with a smaller-lead ball screw.
Recirculating balls reduce sliding friction and support smooth conversion between rotary and linear motion.
Performance Considerations
A large lead increases travel speed, but it does not automatically increase thrust or load capacity. At the same motor torque, increasing the lead generally reduces the linear force available from the screw. Diameter, lead, load rating and motor torque must therefore be evaluated together.
A larger lead also produces more linear travel for each motor revolution or encoder pulse. Applications requiring very fine feed increments may be better suited to a smaller lead or may require a suitable motor, encoder and reduction arrangement.
Large lead ball screws have a stronger back-driving tendency because of their larger helix angle and low-friction rolling structure. Vertical axes should incorporate a motor brake, counterbalance, mechanical lock or another suitable fall-prevention system.
For high-speed or long-stroke operation, the allowable screw rpm must be checked against the critical speed, DN value, unsupported length, support arrangement and lubrication conditions. The theoretical speed calculated from the lead alone is not the final allowable operating speed.
Typical Applications
Customization Options
DLY commonly supplies rolled C7 large lead ball screws, while ground C5 configurations can be evaluated according to the required accuracy and model. Right-hand thread is standard, and left-hand thread can be customized.
The following items can be confirmed according to the equipment design:
- Screw diameter and lead combination
- Overall length and effective threaded length
- Accuracy grade and axial-clearance requirement
- Fixed-side and support-side shaft-end machining
- Bearing seats, coupling ends, threads, grooves and keyways
- Matching support units and motor couplings
Frequently Asked Questions
Q: Does large lead mean large screw diameter?
A: No. Lead is the linear distance travelled by the nut during one screw revolution. Screw diameter and lead are separate parameters. For example, a 20 mm diameter screw can have a 20 mm or 40 mm lead.
Q: Is the SFE series the main DLY large lead option?
A: Yes. The regular SFE range includes leads from 16 mm to 64 mm, with diameter-to-lead combinations such as 16 × 32 mm, 20 × 40 mm, 25 × 50 mm and 32 × 64 mm. SFU and selected double-nut configurations are also available.
Q: Do the -3 and -6 suffixes indicate different leads?
A: No. Models such as SFE2020-3 and SFE2020-6 have the same 20 mm diameter and 20 mm lead. The suffix identifies the ball-circuit configuration. The load rating, rigidity and nut details differ between the two versions.
Q: Can the screw length and shaft ends be customized?
A: Yes. Overall length, threaded length, bearing seats, coupling ends, threads, grooves and keyways can be manufactured according to an approved drawing and technical feasibility review.
Q: What is the minimum order quantity for a customized large lead ball screw?
A: Because it is a customized product, the minimum order quantity is not one piece. The exact quantity must be reviewed and confirmed by the technical department according to the model, length, machining requirements and production process.
Send the required diameter, lead, quantity, total length, travel speed, axial load and shaft-end drawing. DLY will confirm the suitable SFE, SFU or double-nut configuration.
Hot Tags: large lead screw, China large lead screw manufacturers, suppliers, factory, 12mm ball screw, 3000mm ball screw, eye ball screw, ball screws and actuators co, ball screw transmission, ball screw 20mm

