POS8

POS8
Details:
POS8 male rod end bearing with 8 mm bore, M8×1.25 external thread, 7.2 kN dynamic load rating and 11.6 kN static load rating. Available for linkage and motion-control assemblies.
Send Inquiry
Description
Send Inquiry

The POS8 male rod end bearing combines an 8 mm spherical bearing bore with an M8×1.25 external thread. It is used at the end of a linkage, control rod or actuator connection where the joint must transmit load while accommodating angular movement and minor alignment variation.

POS8 has a compact male-threaded housing, a spherical inner ring and a 15.875 mm ball diameter. Its principal dimensions include a 12 mm inner-ring width, 42 mm center height and 54 mm maximum overall length. The rated dynamic load is 7.2 kN and the rated static load is 11.6 kN.

POS8 is suitable for mechanical linkages, automation equipment, cylinder connections, adjustment mechanisms and other low-speed oscillating joints. Female-threaded alternatives are available in the PHS rod end bearing range.

Model identification: POS indicates a male-threaded rod end bearing, while 8 identifies the 8 mm bearing bore. The standard external thread for POS8 is M8×1.25.

Product Specifications

Parameter Symbol POS8 Unit
Bearing bore diameter d 8 mm
External thread d3 M8×1.25 -
Inner-ring width B 12 mm
Housing width C1 max 9 mm
Thread length l1 max 25 mm
Housing diameter d2 max 24 mm
Center height h 42 mm
Maximum overall length l2 max 54 mm
Ball diameter dk 15.875 mm
Inner-ring outside diameter d1 10.3 mm
Basic dynamic load rating C 7.2 kN
Basic static load rating C0 11.6 kN
Weight - 30 g

Unit note: All dimensional values are in millimetres. C is the basic dynamic load rating, C0 is the basic static load rating, and the listed weight is the nominal weight of one POS8 bearing.

Structure and Dimensions

The spherical inner ring permits angular movement between the connected components. The external M8×1.25 thread is screwed into a mating internal thread or secured by an appropriate nut arrangement. The 8 mm bore connects to a pin, bolt or shaft selected according to the linkage design.

POS8 male rod end bearing dimensions and external thread structure

Product Features

Male Thread Connection

The M8×1.25 external thread allows the bearing to be installed at the end of a connecting rod, actuator component or adjustment mechanism.

Angular Movement

The spherical bearing structure accommodates oscillating movement and angular variation between connected parts.

Compact Dimensions

The 8 mm bore and M8 thread suit compact linkages where a larger rod end would increase the connection size unnecessarily.

Separate Load Ratings

Dynamic and static load ratings are provided separately for linkage calculation and model confirmation.

Typical Applications

POS8 is generally used in low-speed oscillating or adjustment joints rather than as a continuously rotating bearing. Typical installation positions include:

  • Pneumatic and electric actuator linkages
  • Automation equipment connecting rods
  • Control levers and adjustment mechanisms
  • Packaging and material-handling machinery
  • Industrial fixtures and positioning mechanisms
  • Mechanical joints requiring limited angular compensation

Application limit: The rated load is not the permitted working load for every installation. Load direction, impact, vibration, oscillation angle, operating frequency, lubrication, temperature and required service life must also be considered.

POS8 and PHS8

Item POS8 PHS8
Thread structure External male thread Internal female thread
Nominal bore 8 mm 8 mm
Connection method Screws into a mating female thread Accepts a mating male-threaded rod
Replacement requirement Confirm bore, thread pitch and overall dimensions Confirm bore, internal thread and housing dimensions

Installation

  1. Confirm that the mating thread is M8×1.25 and that the available thread engagement is suitable for the joint.
  2. Use the housing or designated wrench position for tightening. Do not apply installation torque through the spherical inner ring.
  3. Align the connected parts before final tightening so that the bearing does not operate continuously at its maximum articulation position.
  4. Check that the pin or bolt through the 8 mm bore is correctly fitted and retained.
  5. Inspect the bearing periodically for looseness, contamination, corrosion, abnormal wear and restricted movement.

Supply Information

Model POS8 male rod end bearing
Standard Thread M8×1.25 right-hand thread
MOQ 1 piece for standard POS8
Left-Hand Thread Subject to model and production confirmation
Packaging Individual or bulk export packaging according to order quantity
Warranty 1 year under agreed operating and installation conditions

FAQ

 

Q: Does POS8 have an M8 thread and an 8 mm bearing bore?

A: Yes. The spherical bearing bore is 8 mm, and the standard male thread is M8×1.25. Both dimensions should be checked because the bore connects to the joint pin while the external thread connects the housing to the linkage.

Q: Can POS8 be used for continuous high-speed rotation?

A: POS8 is primarily intended for oscillating movement, angular adjustment and linkage connections. Continuous high-speed rotation requires a bearing designed and rated for that operating condition.

Q: Can the 11.6 kN static rating be used directly as the working load?

A: No. The working load should include a suitable safety factor and account for impact, vibration, load direction, duty cycle, articulation angle and expected service life. The 11.6 kN value is the basic static load rating, not a universal permitted operating load.

Q: Is a left-hand threaded POS8 available?

A: Left-hand threaded rod ends can be supplied for applicable models. The required thread direction must be stated clearly in the inquiry because right-hand and left-hand versions cannot be identified only by the 8 mm bore.

Q: What should be checked when replacing an existing POS8 bearing?

A: Confirm the 8 mm bore, M8×1.25 thread, thread direction, center height, overall length, housing width, load rating and available articulation space. A sample, drawing or clear measurement photo can be used for confirmation.

Q: Can POS8 and PHS8 be substituted for each other?

A: Not directly. POS8 has an external male thread, while PHS8 has an internal female thread. The connected rod and available installation space determine which structure is suitable.

 

POS8 Inquiry

Send the required quantity, thread direction, application and replacement dimensions to confirm the POS8 specification and delivery arrangement.

Email: export@dlybearing.com   |   Website: www.deliyalinearmotion.com

Hot Tags: pos8, China pos8 manufacturers, suppliers, factory

Send Inquiry