POS6 Male Rod End Bearing

POS6 Male Rod End Bearing
Details:
POS6 male rod end bearing with 6mm bore, M6×1.0 right-hand male thread, bronze liner, zinc plated carbon steel body, grease nipple, 13° angular misalignment and 7.2KN static load capacity.
Send Inquiry
Description
Send Inquiry

POS6 is a small-size male rod end bearing with a 6mm bore and M6×1.0 right-hand male thread. It is designed for linkage mechanisms where a threaded rod end needs to connect with a pin, shaft or moving joint while allowing angular misalignment during motion.

This model uses a carbon steel rod body with white zinc plating, a hardened chrome-plated steel ball, and a bronze liner on the spherical sliding surface. It is suitable for compact mechanical linkages, automation equipment, power tools, light hydraulic mechanisms and CNC auxiliary structures.

POS6 male rod end bearing with M6 right hand thread
POS6 rod end bearing dimension drawing

POS6 Product Overview

POS6 belongs to the POS male rod end bearing series. The male threaded shank allows the bearing to be installed directly into a threaded rod, connecting arm or machine linkage. The spherical ball inside the eye can rotate and tilt within a limited angle, helping compensate for alignment deviation between connected parts.

With a 6mm inner bore and M6×1.0 male thread, POS6 is usually selected for small mechanical assemblies where compact size, simple installation, moderate load capacity and maintenance lubrication are required.

Key Specifications of POS6

Model POS6
Bearing Type Male rod end bearing with external thread
Bore Size 6 mm
Thread Size M6×1.0 right-hand male thread
Maximum Angular Misalignment 13°
Dynamic Load Rating C 4.3 KN
Static Load Rating C0 7.2 KN
Approximate Weight 20 g

Structure and Material

The POS6 rod end bearing consists of a male threaded rod body, an outer housing, a spherical steel ball, a bronze liner and a lubrication structure. The rod body is made from carbon steel and finished with white zinc plating to improve surface protection. The ball is hardened and chrome-plated to support wear resistance during repeated oscillating movement.

The bronze liner is located between the spherical ball and the housing surface. This structure helps reduce sliding wear and supports smoother movement under proper lubrication. The housing is supplied with a lubrication hole or grease nipple, making it convenient to add grease during maintenance.

Rod Body

Carbon steel with white zinc plated surface.

Spherical Ball

Hardened chrome-plated steel ball for strength and wear resistance.

Sliding Surface

Bronze liner between the ball and housing surface.

Lubrication

Grease nipple or lubrication hole for convenient relubrication.

POS6 Dimensions

The following dimensions are used to confirm installation space, thread matching, pin diameter and linkage connection. Please check both the bore size and male thread before replacing an existing rod end bearing.

Model d d3 B C1 max l1 max d2 max h l2 max dk d1
POS6 6 M6×1 9 6.75 23 20 36 46 12.7 8.7

Where POS6 Is Usually Used

POS6 is suitable for compact linkage positions where the bearing needs to transmit force while allowing limited angular movement. It is often selected when the connecting rod, lever, cylinder end or mechanical arm uses an M6 right-hand thread.

Small hydraulic cylinder ends
Automation linkages
Power tool mechanisms
CNC auxiliary equipment
Packaging machinery
Light mechanical control rods

How to Confirm POS6 Before Ordering

POS6 is a small standard rod end bearing, but several details still need to be checked before replacement. The bore, thread direction, thread pitch, body length and lubrication structure should match the existing installation.

Item to Confirm POS6 Standard Why It Matters
Bore diameter 6 mm Confirms the pin or shaft connection size.
Thread size M6×1.0 Confirms the rod or linkage thread match.
Thread direction Right-hand male thread Left-hand and right-hand threads cannot replace each other directly.
Angular movement Maximum 13° Confirms whether the linkage angle is within the bearing movement range.
Lubrication type Lubrication hole or grease nipple Affects maintenance convenience and service life.

POS6 vs Nearby POS Sizes

POS6 is selected when the assembly requires a 6mm bore and M6 thread. If the installation uses a smaller M5 thread or a larger M8 thread, POS5 or POS8 should be checked instead.

Model Bore d Male Thread d3 L2 max Approx. Weight
POS5 5 mm M5×0.8 42 mm 13 g
POS6 6 mm M6×1 46 mm 20 g
POS8 8 mm M8×1.25 54 mm 30 g

FAQ

 

Q: What does POS6 mean?

A: POS6 refers to a male rod end bearing with a 6mm bore. This model uses an M6×1.0 right-hand male thread and is used for small linkage and joint connections.

Q: Is POS6 a right-hand or left-hand thread rod end bearing?

A: This POS6 model is a right-hand male thread type. If a left-hand thread is required, the thread direction should be clearly confirmed before ordering.

Q: Can POS6 be relubricated?

A: Yes. The housing has a lubrication hole or grease nipple, allowing grease to be added during maintenance.

Q: What is the maximum angular misalignment of POS6?

A: The maximum angular misalignment of POS6 is 13°. The actual installation angle should remain within the allowed working range.

Q: What information should be provided for a POS6 quotation?

A: Please confirm the model POS6, quantity, thread direction, application, and whether standard zinc plated carbon steel material is acceptable. For replacement, photos or an existing sample can help confirm compatibility.

 

 

Contact DLY for POS6 Rod End Bearing

Send the required model, quantity, thread direction and application. DLY can help confirm whether POS6 is suitable for your linkage or replacement requirement.

Hot Tags: POS6 Male Rod End Bearing, China POS6 Male Rod End Bearing manufacturers, suppliers, factory

Send Inquiry