As an efficient precision transmission component, a ball screw converts rotary motion into linear motion through rolling contact between the screw shaft, ball nut and circulating balls.
At DLY, we manufacture and supply different ball screw configurations for CNC machine tools, industrial automation, robotics, packaging machinery, medical equipment and other linear motion systems.
Ball screws can be classified by manufacturing method, ball circulation system, nut structure, accuracy grade, lead and preload. Understanding these differences helps us select an appropriate configuration according to the customer's load, speed, stroke, accuracy and installation requirements.
Classification by Manufacturing Method
According to the method used to manufacture the screw raceway, ball screws are commonly divided into rolled and ground types.
Rolled Ball Screws
A rolled ball screw is produced by forming the thread profile through a controlled rolling process. The process provides efficient production and is suitable for standard sizes and larger-volume requirements.
We mainly supply cold-rolled ball screws in C5, C7 and C10 accuracy grades, depending on the series, dimensions and project requirements.
Typical applications include:
- General CNC machine tool feed systems
- Industrial automation equipment
- Packaging and printing machinery
- 3D printers and positioning mechanisms
- Material-handling and assembly equipment
Ground Ball Screws
A ground ball screw is produced by precision grinding of the screw raceway. This process provides tighter control of lead accuracy, raceway geometry and surface condition.
At DLY, ground ball screws can be supplied in C0, C3 and C5 accuracy grades according to the required specification and technical review.
Ground ball screws are commonly considered for:
- Precision CNC machine tools
- Inspection and measuring equipment
- Semiconductor manufacturing equipment
- Precision automation systems
- Applications requiring tighter lead accuracy
| Comparison | Rolled Ball Screw | Ground Ball Screw |
|---|---|---|
| Raceway production | Formed by rolling | Finished by precision grinding |
| Typical DLY grades | C5, C7 and C10 | C0, C3 and C5 |
| Production characteristic | Efficient production for standard and larger-volume requirements | Tighter control of lead accuracy and raceway geometry |
| Selection basis | General positioning, automation and cost-sensitive applications | Applications requiring higher positioning accuracy |
Classification by Ball Circulation System
The balls inside a ball screw nut must continuously return from the end of the loaded raceway to the beginning. This is achieved through either an external or internal circulation system.
External Circulation
In an external-circulation ball nut, the balls return through a tube or another return component located outside the main nut raceway.
This arrangement is commonly used in many standard ball screw nut designs. It can provide a flexible circulation path and is suitable for a wide range of screw diameters and leads.
Internal Circulation
In an internal-circulation design, a return insert or deflector transfers the balls from one raceway circuit to the next inside the nut body.
The arrangement can provide a compact nut diameter and a short return path. It is commonly used where installation space around the nut is limited.
The circulation method alone does not determine the accuracy or rigidity of the complete ball screw. These properties also depend on the raceway accuracy, nut structure, preload, number of loaded circuits and installation conditions.
Classification by Ball Nut Structure
Ball nuts are available in several external shapes and mounting configurations. Round and flange nuts are among the most widely used designs.
Round Ball Nuts
A round nut has a cylindrical outer body without an integrated mounting flange. It can be installed inside a separate nut housing or mounting block.
This structure is suitable for equipment with a customized nut housing or limited radial installation space. The housing design must prevent the nut from rotating and must transfer the axial load safely.
Flange Ball Nuts
A flange nut includes mounting holes on the flange so that the nut can be connected directly to the moving table, bracket or nut housing.
Flange nuts simplify axial mounting and are available in different flange shapes, including circular, single-cut and double-cut configurations.
Classification by Single-Nut and Double-Nut Design
Ball screws can also be classified according to whether the assembly uses a single ball nut or two connected nuts.
Single-Nut Ball Screws
A single-nut ball screw uses one nut body. Internal axial clearance may be controlled through ball selection, raceway geometry or another preload method.
Single nuts provide a compact structure and are widely used in industrial automation, general machine tools and positioning equipment.
Double-Nut Ball Screws
A double-nut assembly uses two nut bodies with an adjustable spacer or preload structure between them. The arrangement can remove axial clearance and provide higher axial rigidity.
Double-nut ball screws require more axial installation space and are generally selected for equipment with higher rigidity and positioning requirements.
Classification by Accuracy Grade
The accuracy grade describes limits such as lead deviation and variation over a specified travel. A smaller C-grade number generally represents tighter lead-accuracy control.
At DLY, commonly supplied accuracy grades include:
- C0 and C3: Ground ball screws for high-precision positioning requirements
- C5: Available in rolled or ground configurations according to the product and application
- C7: Commonly used for standard CNC and industrial automation applications
- C10: Used for general transmission applications with less demanding positioning requirements
For reference, C3 lead accuracy may be controlled to approximately ±0.008 mm over 300 mm, while C5 may be controlled to approximately ±0.018 mm over 300 mm, subject to the applicable standard and product specification.
Accuracy grade should not be selected only by choosing the smallest grade number. Machine structure, support bearings, coupling, motor control, thermal expansion and installation alignment also affect the final positioning accuracy.
Classification by Preload and Axial Clearance
Preload is applied to reduce or eliminate axial clearance between the screw shaft, balls and nut raceways. It can improve axial rigidity and positioning response.
Ball screw assemblies may be supplied with axial clearance, controlled near-zero clearance or different preload levels. The exact classification and available preload depend on the nut design and manufacturer's specification.
A higher preload is not automatically better. Excessive preload increases starting torque, heat generation and internal contact stress, which may reduce service life.
We determine the appropriate clearance or preload by considering:
- Required axial rigidity
- Positioning and repeatability requirements
- Operating load and speed
- Permitted starting torque
- Heat generation and duty cycle
- Expected service life
Classification by Lead
Lead is the linear distance travelled by the ball nut during one complete revolution of the screw shaft.
A smaller lead provides more mechanical resolution for a given motor rotation, while a larger lead produces greater linear travel per revolution.
| Lead Type | Typical Characteristic | Application Consideration |
|---|---|---|
| Small lead | Less linear travel per screw revolution | Useful where finer mechanical resolution or higher thrust from the same motor torque is required |
| Standard lead | Balanced speed, thrust and resolution | Suitable for general machine tools and automation equipment |
| High lead | More linear travel per screw revolution | Suitable for higher linear speed when critical speed, DN value, acceleration and drive torque are properly checked |
Ball Screw Applications
Different ball screw types are selected for different machine requirements. Common application areas include:
- CNC machine tools: Feed axes, worktables, tool positioning and auxiliary mechanisms
- Industrial automation: Linear modules, assembly equipment, transfer systems and positioning units
- Robotics: Linear axes, lifting units and actuator mechanisms
- Semiconductor equipment: Precision positioning and handling mechanisms
- Medical equipment: Adjustable beds, imaging systems and controlled positioning devices
- Packaging machinery: Filling, sealing, cutting and material-feeding mechanisms
- 3D printers: Z-axis lifting and other controlled linear movements
Selecting a Ball Screw with DLY
No single ball screw type is suitable for every application. At DLY, we review the complete operating requirement before confirming the screw shaft and ball nut configuration.
The main selection information includes:
- Required screw diameter and lead
- Total length, threaded length and effective stroke
- Horizontal or vertical installation
- Axial load and load direction
- Required linear speed and acceleration
- Accuracy and repeatability requirements
- Required axial clearance or preload
- Support-bearing arrangement
- Operating environment and duty cycle
- End-machining drawing and required quantity
Customers can provide an existing model, dimensional drawing or application information. Our team can review the requirements and recommend a suitable rolled or ground ball screw configuration.
Contact DLY
Email: export@dlybearing.com


