Ball Screw Assembly: How Its Components Work Together

Apr 12, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

A ball screw assembly converts the rotary motion of a motor into controlled linear movement. It is widely used in CNC machines, automation equipment, industrial robots, measuring systems and other machinery requiring efficient and repeatable positioning.

The terms "ball screw pair" and "ball screw and nut pair" are sometimes used to describe the combination of the screw shaft and ball nut. In international engineering and purchasing communication, "ball screw assembly" or "ball screw and nut assembly" is generally more natural.

The operating result does not depend on the screw shaft alone. Raceway accuracy, ball circulation, nut clearance or preload, support-bearing arrangement, lubrication and installation alignment must work together as one transmission system.

Main Components of a Ball Screw Assembly

Screw Shaft

The screw shaft contains a helical raceway that determines the nominal diameter, lead and direction of linear movement. When the screw rotates, the lead determines the theoretical linear travel produced by each revolution.

The shaft ends are normally machined for support bearings, locknuts, couplings and other mounting components. End-machining dimensions must match the selected support arrangement and machine structure.

Ball Nut

The ball nut contains matching internal raceways and a recirculation system. It may use a flange, cylindrical body or another mounting form according to the available installation space.

Single-nut and double-nut structures are available for different clearance and rigidity requirements. The correct configuration should be selected according to load, speed, positioning requirement and acceptable drive torque rather than assuming that a higher preload is always better.

Recirculating Balls

Steel balls roll between the screw and nut raceways. After travelling through the loaded contact zone, they return through an internal, external or end-cap circulation path and re-enter the raceway.

This continuous circulation replaces much of the sliding contact found in a conventional lead screw with rolling contact, reducing friction and improving mechanical efficiency.

Return Components, Seals and Lubrication Parts

Return tubes, internal deflectors or end caps guide the balls through the recirculation path. Seals help limit the entry of dust and particles, while lubrication ports allow grease or oil to reach the internal contact surfaces.

Damage, incorrect assembly or contamination in these areas may cause abnormal noise, interrupted ball circulation or increased operating resistance.

How Rotary Motion Becomes Linear Motion

In a typical drive arrangement, the motor rotates the screw shaft through a coupling while the ball nut is fixed to a moving table. Because the nut cannot rotate freely, it travels along the helical raceway as the screw turns.

The arrangement can also be reversed. In some systems, the screw remains axially fixed while the nut rotates, or the screw moves while the nut remains in a fixed housing. The suitable arrangement depends on travel length, speed, inertia, installation space and machine design.

The theoretical linear travel is determined by the screw lead. For example, a 5 mm lead produces 5 mm of theoretical travel for each complete revolution. Actual positioning performance also depends on lead accuracy, axial clearance, elastic deformation, thermal change and the accuracy of the drive and control system.

Factors That Determine Transmission Performance

Lead Accuracy

Lead accuracy describes how closely the actual linear travel follows the specified travel over a given screw length. The required accuracy grade should be selected according to the positioning needs of the machine.

Rolled ball screws are commonly used in general industrial automation, while ground ball screws are selected when the application requires tighter lead accuracy and more controlled motion performance.

Axial Clearance and Preload

Axial clearance affects reversal accuracy when the direction of movement changes. Preload can reduce clearance and increase rigidity, but it also increases internal load, operating torque and heat generation.

The preload condition should therefore match the application. General transport equipment, precision positioning systems and heavy machine axes may require different nut structures and preload levels.

Load and Rigidity

The screw diameter, lead, nut type, ball contact design and support arrangement influence axial load capacity and system rigidity. Dynamic load, static load, acceleration, operating cycle and required service life should be considered during selection.

A screw selected only by diameter may not provide the required life or rigidity. The complete operating condition must be evaluated.

Speed and Unsupported Length

As screw length and rotational speed increase, shaft vibration and critical-speed limits become more important. Long screws may require a larger shaft diameter, a different bearing arrangement, reduced rotational speed or an alternative drive structure.

Vertical applications must also be checked for axial load and buckling risk. The mass being moved and the direction in which the screw is installed can change the selection result.

Support Units Are Part of the Complete Drive

Although support bearings are not part of the screw-and-nut pair itself, they are essential to the completed motion axis. The fixed end normally controls axial position and supports thrust load, while the supported end helps maintain shaft alignment and allows appropriate thermal behaviour.

BK/BF, FK/FF and EK/EF are common support-unit combinations. The correct series and size must match the shaft-end machining and installation arrangement.

DLY supplies matching ball screw support units and can machine shaft ends according to approved drawings or support-unit dimensions.

Installation Accuracy Remains Essential

A high-accuracy ball screw cannot compensate for poor installation. If the screw shaft, support units, nut housing and linear guide system are not aligned correctly, the assembly may develop uneven resistance, vibration, heat or premature wear.

During installation, the mechanism should be moved slowly through its travel before final bolt tightening. Running torque and resistance should remain reasonably consistent without local binding.

The ball nut should not be rotated off the screw shaft without a transfer sleeve. Otherwise, the recirculating balls may fall out or leave their correct positions inside the nut.

Selecting a Complete Ball Screw Assembly

The main information required for selection includes screw diameter, lead, total length, stroke, accuracy grade, nut type, axial load, speed, mounting orientation and shaft-end dimensions. Drawings are particularly important when the assembly must fit existing support units or replace an installed screw.

DLY supplies ball screw assemblies in SFU, SFA, SFE, SFY, DFU, DFI and other configurations. C7 rolled ball screws are available for general industrial applications, while ground ball screws can be supplied for projects requiring higher lead accuracy.

Standard and customized end machining is available for support units, locknuts, couplings and motor connections. Ball screw lengths of up to 6 meters can be evaluated according to diameter, accuracy, processing and transportation requirements.

Need a ball screw and nut assembly for a new machine or replacement?

Send DLY the screw diameter, lead, length, stroke, load, speed, accuracy requirement and shaft-end drawing for technical confirmation.

Contact DLY

← Back to DLY News

Send Inquiry