TBR…UU and TBR…LUU are flanged linear motion ball slide units designed to run on TB supported round rails. Each unit combines an aluminum housing with a matched open-type linear ball bushing, creating a ready-to-mount carriage for moving tables, fixtures and machine components.
The series covers 16, 20, 25 and 30 mm shaft diameters. Standard UU units are intended for installations requiring a shorter carriage, while LUU units use a longer housing and bearing arrangement to provide greater load capacity and improved resistance to moment loads.
TBR slide units can be ordered separately or matched with the corresponding TB supported linear guide rail.
Product Structure
Unlike a loose linear bushing that requires a separately machined bearing seat, the TBR unit places the open-type bushing inside a flanged housing. Four threaded mounting holes are provided on the upper mounting surface, allowing the moving plate to be connected directly to the carriage.
Open Bearing Design
The opening beneath the bearing allows the slide unit to pass over the aluminum support attached to the round rail.
Flanged Housing
The wide upper surface and four mounting holes simplify connection to machine tables, brackets and positioning fixtures.
Matched Slide Bush
Each housing size corresponds to a specified LM…UU-OP or LM…LUU-OP open linear ball bushing.
UU and LUU Versions
| Version | Housing Length | Load Rating | Selection Situation |
|---|---|---|---|
| TBR…UU | Standard-length housing | Standard series rating | Shorter mounting platforms, compact carriages and applications with moderate moment loads |
| TBR…LUU | Extended housing | Higher unit load rating | Longer mounting plates, higher applied loads or installations requiring greater moment resistance |
LUU does not mean a larger shaft diameter. It identifies the extended version of the slide unit. For example, TBR20UU and TBR20LUU both fit a 20 mm rail, but their housing lengths and load ratings are different.
TBR…UU and TBR…LUU Technical Specifications
Dimensions are stated in millimetres. Dynamic and static load ratings are stated in newtons. C refers to the basic dynamic load rating, while C0 refers to the basic static load rating.

| Model | Shaft Ø | C (N) | C0 (N) | W | G | A | M | S1 | J | K | E | h | Slide Bush |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TBR16UU | 16 | 392 | 490 | 62 | 26 | 8 | 42 | M5 | 50 | 30 | 31 | 18 | LM16UU-OP |
| TBR20UU | 20 | 784 | 1176 | 68 | 31 | 10 | 51 | M6 | 54 | 37 | 34 | 21 | LM20UU-OP |
| TBR25UU | 25 | 1568 | 2352 | 82 | 41 | 12 | 65 | M8 | 65 | 50 | 41 | 28 | LM25UU-OP |
| TBR30UU | 30 | 1764 | 2940 | 91 | 48 | 12 | 75 | M8 | 75 | 60 | 45.5 | 33.5 | LM30UU-OP |
| TBR16LUU | 16 | 780 | 980 | 62 | 26 | 8 | 85 | M5 | 50 | 60 | 31 | 18 | LM16LUU-OP |
| TBR20LUU | 20 | 1568 | 2352 | 68 | 31 | 10 | 96 | M6 | 54 | 70 | 34 | 21 | LM20LUU-OP |
| TBR25LUU | 25 | 3136 | 4704 | 82 | 41 | 12 | 130 | M8 | 65 | 100 | 41 | 28 | LM25LUU-OP |
| TBR30LUU | 30 | 3528 | 5880 | 91 | 48 | 12 | 140 | M8 | 75 | 110 | 45.5 | 33.5 | LM30LUU-OP |
Drawing tolerances: K ±0.2 mm, J ±0.2 mm, E ±0.02 mm and h ±0.02 mm. The designation 4-S1 indicates four threaded mounting holes.
TBR…UU and TBR…LUU Model Matching
| Shaft Diameter | Standard Unit | Standard Slide Bush | Extended Unit | Extended Slide Bush |
|---|---|---|---|---|
| 16 mm | TBR16UU | LM16UU-OP | TBR16LUU | LM16LUU-OP |
| 20 mm | TBR20UU | LM20UU-OP | TBR20LUU | LM20LUU-OP |
| 25 mm | TBR25UU | LM25UU-OP | TBR25LUU | LM25LUU-OP |
| 30 mm | TBR30UU | LM30UU-OP | TBR30LUU | LM30LUU-OP |
Selection Considerations
The correct TBR unit should be selected according to the rail diameter, applied load, mounting-plate length and the distance between the load centre and the carriage. The basic load rating is only one part of the selection process.
- Shaft compatibility: the number in the TBR model must match the diameter of the TB rail.
- Available mounting length: confirm dimension M before replacing a UU unit with an LUU unit.
- Moment load: an offset load can create pitching, yawing or rolling moments even when the vertical load is relatively small.
- Block quantity: using two units on one rail or four units across two rails can improve platform support, but rail parallelism becomes more important.
- Operating environment: dust, wood chips and other particles should be controlled to prevent contamination of the ball tracks.
Mounting and Adjustment
- Clean the mounting plate, slide-unit surface and TB rail before assembly.
- Place the slide unit on the rail without forcing or tilting the open bearing over the supported section.
- Position the moving plate and start all four mounting screws before applying final tightening torque.
- For a two-rail mechanism, align the reference rail first and adjust the second rail while moving the platform through its complete stroke.
- Check that the carriage moves without local tight spots, uneven resistance or abnormal noise.
- Lubricate the internal ball circuit and keep the exposed shaft surface clean during operation.
Applications
FAQ
Q: Does TBR20UU fit a 20 mm unsupported shaft?
A: The open bearing structure is intended for a 20 mm TB supported rail. Although the nominal diameter is the same, the housing opening and the intended mounting arrangement should be checked before using it with another shaft configuration.
Q: Can a TBR…UU unit be replaced directly with the LUU version?
A: The shaft diameter can remain the same, but the LUU housing is longer and dimension K changes. The moving plate and mounting-hole positions must therefore be checked before replacement.
Q: Why does the LUU unit have a higher load rating?
A: The longer unit uses an extended bearing arrangement with a larger effective ball-contact region. This increases the published dynamic and static load ratings and provides greater support for an elongated carriage.
Q: Can the internal open linear bearing be replaced?
A: Replacement may be possible when the housing and bearing version match, but the bearing orientation, retaining structure and clearance should be confirmed before disassembly. The corresponding LM…UU-OP or LM…LUU-OP model is listed in the table.
Q: What information should be included in an enquiry?
A: Please provide the TBR model, UU or LUU version, block quantity, matching rail diameter, rail length, operating load and any relevant installation drawing. This helps confirm both the carriage and rail configuration.
Confirm Your TBR Slide Unit
Send the required shaft diameter, UU or LUU version, quantity and installation drawing for model confirmation and quotation.
Contact UsEmail: export@dlybearing.com
Hot Tags: tbr-uu, China tbr-uu manufacturers, suppliers, factory, linear ball bearings and shafts, 16mm Linear Shaft, High Carbon Steel Optical Shaft, round shaft linear bearings, linear guide motor, 20mm Linear Rod

