What is the Difference Between Ball Screw Lead and Pitch

Nov 28, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

Ball screw lead and pitch are two distinct geometric parameters that are frequently misunderstood or used interchangeably. While they may seem similar, they are different parameters that have a major impact on speed, load capacity, positioning accuracy, and motor selection.

This blog provides a practical explanation of the differences between ball screw lead and ball screw pitch, their mathematical relationship, and their effect on performance, along with selection guidance to help you better understand ball screw lead vs pitc

Item Ball Screw Lead Ball Screw Pitch
Meaning Linear travel of the nut per one screw revolution Distance between adjacent screw grooves
Main effect Speed, thrust, resolution, and motor torque Thread geometry and groove spacing
Single-start screw Lead = Pitch Pitch = Lead
Multi-start screw Lead = Pitch × Number of starts Pitch stays the same

 

What is Ball Screw Lead?

The ball screw lead is the linear distance that the nut moves along the screw axis for one full rotation.

For example, if the nut advances 10 mm per revolution, the lead is 10 mm. Lead indicates "how far the nut moves per turn" and directly determines the linear speed of the screw.

Formula:

Speed (mm/s) = Lead × Revolutions per second (rev/s)

A larger lead allows faster travel at the same rotational speed. For example, a DLY SFU1610 ball screw means the screw diameter is 16 mm and the lead is 10 mm, so one full rotation moves the nut 10 mm.

Compared with an SFU1605 ball screw, an SFU1610 ball screw moves twice as far per revolution under the same motor speed. This is why lead selection is closely related to travel speed and positioning control.

What is Ball Screw Pitch?

Ball screw pitch is the distance between adjacent screw grooves. It is a geometric parameter of the thread that reflects how fine or coarse the screw groove spacing is.

In metric ball screws, pitch is usually expressed in millimeters. In inch-based thread descriptions, pitch may also be expressed as threads per inch, or TPI. Pitch is not always the same as lead, especially when the screw uses a multi-start thread design.

In some ball screws, the pitch equals the lead, but this is not true for all screws. The key point is to check whether the screw is single-start or multi-start.

Why Single-Start and Multi-Start Threads Have Different Leads

Most standard rolled ball screws use a single-start thread, meaning the nut follows a single helical path. In this case, for a single-start thread, lead is equal to the pitch.

For high-speed, long-travel, or large-displacement applications, screws may use double-start, four-start, or multi-start threads. In these designs, the nut moves along several thread paths, so the lead equals:

Lead = Pitch × Number of Starts

For example, a 5 mm pitch with a double-start design results in a 10 mm lead. This allows higher linear speed without changing the thread fineness, making it suitable for woodworking machines, packaging equipment, long-travel platforms, and fast automation systems.

  • For a single-start screw, the lead = pitch.
  • For a double-start screw, the lead = 2 × pitch.
  • For a four-start screw, the lead = 4 × pitch.
Ball Screw Lead vs Pitch Explanation

Ball Screw Lead vs Pitch Diagram

 

There are two common ways to measure ball screw lead and pitch: direct measurement and calculation.

1. Direct Measurement

Mark the starting point on the screw or nut, rotate the screw one full turn, and measure the axial distance the nut travels. This distance is the actual lead. This method is suitable for inspecting finished screws, especially when the number of starts is unknown.

2. Calculation Method

If the pitch and number of starts are already known, you can calculate the lead using the formula: Lead = Pitch × Number of starts. This method is ideal for design-stage selection or theoretical checking.

Measure Ball Screw Lead and Pitch

How to Measure Ball Screw Lead and Pitch 

Different Lead Sizes

The ball screw lead affects the movement speed of the nut, the thrust force it can generate, the positioning resolution, and the power required from the drive system.

Lead Type Main Feature Typical Applications
Low-lead ball screw Slower movement, better force advantage, higher positioning resolution CNC machine tools, measuring equipment, semiconductor equipment, vertical axes
Medium-lead ball screw Balanced speed, thrust, and control performance General automation, CNC equipment, linear modules, handling systems
High-lead ball screw Faster travel at the same rotational speed, but lower positioning resolution High-speed feeding, long-stroke machines, packaging equipment, woodworking machines

High-lead ball screws move a relatively large distance every time the screw turns one circle. They are suitable for high-speed or long-stroke machines and can help improve processing efficiency. Some high-lead screw systems can reach very high travel speeds when the shaft diameter, support method, lubrication, and motor system are properly designed.

Low-lead ball screws move at a slower speed, but they can provide better force advantage, better rigidity, and finer positioning resolution. They are suitable for heavy-duty, precise positioning, or applications that require stable operation.

Medium-lead ball screws provide a balance between speed and force. They are very common and suitable for most general machinery and automation systems.

Lead accuracy is also very important. High-speed operation and high-lead screws require good manufacturing quality, accurate thread control, proper support, and appropriate lubrication. Otherwise, vibration, positioning errors, heat generation, or shortened service life may occur.

How to Choose the Right Ball Screw Lead

Ball screws come in common leads of 1, 2, 4, 5, 6, 8, 10, 16, 20, 25, 32, and 40 mm. Small and medium lead products commonly include 5 mm and 10 mm lead options, while larger lead products may include 16 mm, 20 mm, 25 mm, 32 mm, and 40 mm options.

In many ball screw model numbers, the first two digits refer to the nominal shaft diameter, while the last two digits refer to the lead. For example, SFU1605 usually means a 16 mm diameter ball screw with a 5 mm lead, and SFU1610 usually means a 16 mm diameter ball screw with a 10 mm lead.

The lead affects straight-line speed. With a constant input speed, a larger lead means faster linear movement. However, a larger lead may reduce positioning resolution and usually requires careful checking of motor torque, support method, screw length, and critical speed.

Simple selection logic:

  • Choose a smaller lead when precision, thrust, and stable control are more important.
  • Choose a medium lead when the system needs a balance between speed and positioning accuracy.
  • Choose a larger lead when high travel speed and long stroke are the main requirements.
  • For vertical loads or heavy loads, always check thrust force, braking, and safety requirements.
  • For high-speed applications, check critical speed, support unit type, lubrication, and shaft rigidity.
Application Recommended Lead Direction Reason
CNC machine tools Small or medium lead Better positioning control, thrust, and rigidity
Packaging equipment Medium or large lead Higher cycle speed and faster travel
Long-stroke automation Larger lead with proper support Improves travel speed over long distance
Vertical axis Small or medium lead Better thrust control and safer load holding design
3D printer Z axis Small or medium lead Smooth lifting and fine layer positioning

For high-speed applications, the lead can exceed 20 mm. For ground ball screws, the available lead is also related to the nominal diameter, grinding process, helix angle, and required accuracy. Examples such as 32 × 32 or 40 × 40 may be used in some high-speed designs, but larger leads are less common and should be confirmed according to the actual equipment requirements.

In high-speed scenarios, speed, rigidity, accuracy, and service life should be considered together. A larger lead can increase travel speed, but it may also make positioning resolution, vibration control, and lead accuracy more sensitive. Therefore, large-lead ball screws are often selected together with suitable nut type, support units, lubrication, and drive system.

FAQ About Ball Screw Lead and Pitch

1. Is ball screw lead the same as pitch?

For a single-start ball screw, lead and pitch are the same. For a multi-start ball screw, lead is equal to pitch multiplied by the number of starts.

2. What does SFU1605 mean?

SFU1605 usually means a ball screw with a nominal diameter of 16 mm and a lead of 5 mm. One full screw revolution moves the nut 5 mm along the screw axis.

3. Does a larger ball screw lead always mean better performance?

No. A larger lead can provide faster linear travel, but it may reduce positioning resolution and require more careful checking of torque, critical speed, vibration, and support structure.

4. Which ball screw lead is better for precision equipment?

Small or medium lead ball screws are usually preferred for precision equipment because they provide finer positioning resolution and better control under the same motor conditions.

Conclusion

Pitch is the distance between adjacent screw grooves, while lead is the linear travel the nut makes per one screw revolution. The pitch and lead are equal with single-start screws. For multi-start screws, the lead is the pitch multiplied by the number of starts.

When selecting a ball screw, lead should not be considered alone. It affects linear speed, thrust force, positioning resolution, motor torque, vibration, and overall machine performance. A smaller lead is usually better for precision and force control, while a larger lead is more suitable for high-speed and long-stroke movement.

As an experienced ball screw manufacturer, DLY provides high precision ball screws, rolled ball screws, ground ball screws, ball screw assemblies, and professional technical support. If you are not sure which lead is suitable for your equipment, you can provide the required stroke, load, speed, accuracy, installation direction, and motor information for specification support.

Need help choosing the right ball screw lead?

DLY can help match the proper ball screw diameter, lead, nut type, support unit, and end machining according to your machine speed, load, stroke, and accuracy requirements.

Email: export@dlybearing.com


Get Ball Screw Lead Selection Support
Send Inquiry