Ultimate Guide to DLY Ball Screw Assemblies: Structure, Precision, Preload Torque and Maintenance

Jul 14, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

 

Ball screw assemblies are widely used in CNC machines, automation equipment, linear modules, packaging machines and precision positioning systems. For buyers and engineers, selecting a suitable ball screw assembly is not only about screw diameter and lead. Structure, lead accuracy, axial clearance, preload torque, material, lubrication and maintenance are also important factors.

This guide explains the structure, precision, preload torque and maintenance points of DLY ball screw assemblies, helping users better understand how to select, install and maintain a suitable ball screw solution for industrial applications.

Precision Ball Screw Assemblies

1. Features of DLY Precision Ball Screw Assemblies

A ball screw assembly is a linear motion system that converts rotational motion into linear motion, or converts linear motion back into rotational motion, by using rolling steel balls as the transmission medium.

A complete ball screw assembly usually includes the screw shaft, ball nut, steel balls, return structure, seals or scrapers, and related support components according to the machine design.

High Transmission Efficiency

DLY ball screws deliver transmission efficiency of about 90% to 98%, which is much higher than traditional sliding screw systems. This helps generate greater thrust with less driving torque.

Smooth and Stable Movement

The rolling contact design reduces friction resistance and helps avoid stick-slip at low speed, making ball screw assemblies suitable for precise micro-feed and repeated positioning.

High Precision

With proper lead accuracy, preload and support design, a ball screw assembly can provide stable positioning accuracy and repeatability in CNC and automation equipment.

High Durability

The rolling contact surface of the screw and nut is heat treated to improve wear resistance. Proper lubrication and dust protection help extend service life.

Excellent Synchronization

When several ball screw assemblies are used to drive identical components, smooth motion and stable response are important for multi-axis and parallel-motion systems.

Backlash and Preload Control

By controlling axial clearance and applying suitable preload, ball screw assemblies can improve rigidity, reduce backlash and support better positioning performance.

Product Structure

1. Axial Return Structure

The axial return structure allows the balls to circulate smoothly along the nut body. It is commonly used in ball screw assemblies that require stable motion, reliable load transmission and good installation adaptability.

Axial Return Structure of Ball Screw Assembly
Axial return structure of a ball screw assembly.

2. Inner Loop Return Structure

The inner loop return structure is suitable for compact ball screw nut designs. It helps reduce the overall nut size while maintaining smooth ball circulation and stable positioning performance.

Inner Loop Return Structure of Ball Screw Nut
Inner loop return structure of a ball screw nut.

Lead Accuracy and Preload Torque of Ball Screws

1. Precision Design

Lead accuracy directly affects positioning accuracy and repeatability. When choosing a ball screw assembly, users should confirm the required accuracy grade according to machine type, stroke length, positioning requirement and budget.

For precision ball screws, such as C0 to C5 grades, lead accuracy is usually evaluated according to standards such as JIS B1192 and GB/T 17587. Important parameters include cumulative lead deviation, fluctuation within a given length and variation within one revolution.

For general-purpose rolled ball screws, such as C7 and C10 grades, the accumulated lead error within any 300 mm of effective screw length is often used as an important reference. In many automation systems, a C7 rolled ball screw is a practical choice when the machine needs reliable motion performance at an economical cost.

Lead Accuracy of Ball Screw
Lead accuracy diagram of a ball screw.

2. Terminology of Lead Accuracy

Term Symbol Meaning Reference
Target Value of Cumulative Lead T The difference between cumulative basic lead and cumulative nominal lead within the effective thread length. It considers thermal expansion, elastic deformation and practical operating factors. Determined by test or experience
Cumulative Actual Lead - The measured value of the cumulative lead. Measured value
Cumulative Representative Lead - A straight line representing the trend of the cumulative actual lead curve, usually determined by the least squares method or a similar method. Calculation reference
Deviation of Cumulative Representative Lead E The difference between the cumulative representative lead and the cumulative basic lead. Refer to permissible value table
Variation e, e300, e2π The maximum deviation of the cumulative actual lead from two parallel lines offset from the cumulative representative lead. It may refer to the full effective screw length, any 300 mm length, or one revolution of the screw shaft. Refer to permissible value table

In buyer language, C5 ball screws are usually selected when higher positioning accuracy and better repeatability are required. C7 ball screws are commonly used when the machine needs stable motion performance with more economical cost.

3. Permissible Values of Cumulative Lead Error and Fluctuation

The following reference images help users understand the relationship between accuracy grade, cumulative lead error and fluctuation value.

Permissible Values of Cumulative Lead Error
Permissible values of cumulative lead error and fluctuation according to accuracy grade.
Permissible Values of Fluctuation Over 300 mm Threaded Length
Permissible values of fluctuation over a threaded length of 300 mm and wobble within one revolution.

Materials and Hardness

Material and heat treatment influence the load capacity, wear resistance and service life of a ball screw assembly. For overseas buyers, it is important to confirm both the screw shaft material and nut material before ordering.

Part Name Material Heat Treatment Method Hardness
Precision Grade Ball Screw 50CrMo4 QT Medium frequency induction heat treatment HRC 60–64
Rolled Grade Ball Screw S55C Medium frequency induction heat treatment HRC 60–64
Ball Screw Nut SCM415H Carburizing heat treatment HRC 58–62
Ball Screw Nut 20CrMo Vacuum heat treatment HRC 60–64

DLY supply note: DLY cold rolled ball screws commonly use S55C shaft material, and DLY ball screw nuts commonly use 20CrMo material. For special requirements, material, accuracy grade, length and end machining should be confirmed according to drawings or application conditions.

Medium Frequency Heat Treatment

Medium frequency induction heat treatment is used to improve surface hardness and wear resistance. The hardened raceway surface helps the ball screw assembly maintain stable movement under repeated rolling contact.

Lubrication and Dust Prevention

1. Lubrication

Ball screw assemblies should always be kept properly lubricated. Suitable lubricants help reduce friction between the steel balls, screw shaft and nut groove, lower running temperature, reduce wear and improve motion smoothness.

The lubricants and greases used for ball screws are generally lithium-based lubricating oils with a viscosity of 30–40 cSt at 40°C. Lubricating oils may conform to ISO grades 32–100 depending on operating conditions.

  • For low-temperature applications, lubricants with lower base oil viscosity are usually selected.
  • For high-temperature, high-load, oscillating or low-speed applications, lubricants with higher base oil viscosity are usually selected.
  • Before replenishing lubricant, wipe off old lubricant and contamination on the screw shaft.

2. Inspection and Replenishment Intervals for Lubricants

Lubrication Method Inspection Interval Inspection Items Replenishment or Replacement Interval
Automatic Interval Lubrication Every week Oil quantity and contamination Replenish at each inspection, and adjust the amount according to oil reservoir capacity.
Grease First 2–3 months of operation Presence of foreign particles Usually replenish once a year, but supplement as needed based on inspection results.
Oil Bath Before daily start of work Oil level management Replenish appropriately according to consumption.

3. Dust Prevention

Like rolling bearings, ball screw assemblies may experience accelerated wear or damage if foreign particles, metal chips, moisture or dust enter the ball circulation system.

DLY ball screw nuts are equipped with scrapers on both front and rear ends for dust protection. In addition, an O-ring seal can be added to the scraper on the flange end to help prevent oil leakage.

In dusty environments, machine tools, cutting equipment or systems with coolant mist, external protective covers are strongly recommended.

Accuracy, Clearance, Preload Levels and Nut Types

Accuracy grade, axial clearance and preload level should be selected according to the machine requirement. Higher preload can improve rigidity, but excessive preload may increase friction torque and heat generation. For this reason, preload should not be selected only by pursuing "the higher, the better".

1. Reference Table for Selection

Accuracy Grade Preload and Clearance Nut Types and Forms Screw Types
C10 P0 clearance Single nut Cold rolled screw / rolled grade ball screw
C7 P1 or P0. DLY standard is usually P1. According to customer requirements Cold rolled screw / rolled ball screw
C5 Manufactured according to customer requirements. If no special requirement, DLY standard is usually P2. According to customer requirements Cold rolled or ground screw with lead accuracy chart
C3 Manufactured according to customer requirements. If no special requirement, DLY standard is usually P2. According to customer requirements Ground screw with lead accuracy chart

2. Clearance P0: Maximum Axial Clearance

Ball Screw Outer Diameter Maximum Axial Clearance for Cold Rolled Ball Screws Maximum Axial Clearance for Ground Ball Screws
Φ04–Φ14 Miniature Ball Screws 0.05 mm 0.015 mm
Φ15–Φ40 Medium-Sized Ball Screws 0.08 mm 0.025 mm
Φ50–Φ100 Large Ball Screws 0.12 mm 0.05 mm
Over Φ100 Extra-Large Ball Screws 0.18 mm 0.08 mm

3. Zero Clearance and Common Reference Values for Preload P2

P1 usually refers to zero clearance without preload. P2 preload is used when the machine requires higher rigidity and better backlash control. The suitable preload level should be confirmed according to load, speed, accuracy requirement and service life expectation.

Common Reference Values for Preload P2
Common reference values for preload P2.

How to Choose a Suitable Ball Screw Assembly

For buyers, the most important point is not only reading the accuracy table, but matching the ball screw assembly with the actual machine condition. The following table gives a practical selection direction.

Application Requirement What to Check Suggested Direction Buyer Note
General automation equipment Diameter, lead, C7 accuracy, axial clearance Rolled ball screw assembly Suitable for stable motion and economical cost.
CNC machine axis Lead accuracy, rigidity, preload torque, support method C7 or C5 ball screw depending on precision requirement Confirm positioning accuracy and repeatability before choosing.
Vertical lifting axis Load direction, brake design, nut safety, installation direction Ball screw assembly with suitable support and protection Prevent the nut from sliding or falling during installation.
High-speed movement Lead, critical speed, lubrication, nut structure High lead or high-speed ball screw Check speed, noise, heat and service life together.
Long stroke transmission Screw diameter, support method, critical speed, shaft deflection Larger diameter or customized end support solution Long screws need careful packaging and installation alignment.

DLY Ball Screw Assembly Supply Capability

DLY supplies rolled and ground ball screw assemblies for CNC machines, automation systems, packaging equipment, linear modules and customized transmission systems. We can provide matched nuts, end machining, support units and customized lengths according to drawings or application requirements.

Product Option DLY Supply Capability
Rolled Ball Screw C7 accuracy grade, suitable for general automation and cost-sensitive applications.
Ground Ball Screw C5 accuracy grade, suitable for higher precision positioning requirements.
Ball Screw Nut SFU, DFU and customized nut types according to machine structure.
End Machining Processed according to drawing, support unit, coupling and motor connection requirements.
Assembly Support Ball screw, nut, support unit, coupling and related linear motion components are available.

Maintenance and Usage of DLY Ball Screws

Since ball screws are precision transmission components, correct maintenance and usage are important for motion accuracy, service life and machine stability.

1. Clean Before Lubrication

DLY ball screws undergo rust prevention treatment before shipment. Before use, clean off the rust-preventive oil completely and immediately apply suitable lubricant.

2. Keep the Ball Screw Lubricated

The ball screw assembly must always be kept lubricated. Lack of lubrication may cause abnormal wear, rust, noise, higher running resistance or reduced service life.

3. Perform Regular Rust Prevention

If the product will not be used within one month after purchase, regular rust prevention maintenance should be performed. The interval may vary depending on local temperature, humidity and storage conditions.

4. Clean Dust and Metal Particles

Inspect the ball screw surface monthly. If the screw surface is contaminated with dust or metal particles, clean it first and then apply lubricant again.

5. Do Not Disassemble the Nut Without Tools

The ball screw nut is a precision assembly. Do not disassemble the nut by yourself, because improper handling may cause balls to fall out and damage the circulation system.

6. Pay Attention to Vertical Installation

When installing the ball screw vertically, be careful to prevent the nut from falling off. If the nut accidentally falls off, contact DLY or a professional technician for assistance.

7. Use Protective Covers in Harsh Environments

The product should be used in a clean environment. If the equipment produces dust, metal chips or coolant mist, external protective covers should be installed to protect precision and lifespan.

8. Avoid High-Temperature Environments

Do not use standard ball screw assemblies in environments exceeding 80°C unless a heat-resistant specification is confirmed. High temperature may damage seals and shorten service life.

Conclusion

Ball screw assemblies are key components for converting rotary motion into precise linear motion. Structure, lead accuracy, material, lubrication, axial clearance and preload all influence machine performance.

For general automation equipment, DLY C7 rolled ball screws are often a practical choice. For applications requiring higher positioning accuracy, DLY can also provide C5 ground ball screws and customized ball screw assemblies according to drawings or project requirements.

Proper selection, correct installation and regular maintenance can help improve motion stability, reduce downtime and extend the service life of the ball screw system.

Contact DLY for Ball Screw Assembly Selection

Need help choosing a suitable ball screw assembly for CNC machines, automation equipment, packaging machines or linear modules? Send us your screw diameter, lead, total length, accuracy requirement, drawing or application details. DLY can help recommend a suitable rolled or ground ball screw assembly with nut, end machining and support components.

Email: export@dlybearing.com

Address: No. 12, Baixian Road, Shuige Industrial Zone, Lishui, Zhejiang, China

 

Related Products and Technical Resources

  • SFU Ball Screw - standard flanged ball screw for CNC machines and automation equipment.
  • DFU Ball Screw - double nut ball screw for higher rigidity and better backlash control.
  • High Speed Ball Screw - suitable for fast linear motion and high lead applications.
  • High Load Ball Screw - designed for heavy-duty linear transmission requirements.
  • Ball Screw Products - view more DLY ball screw models and customized options.
  • Back to Blog - read more DLY technical articles about ball screws and linear motion components.
Send Inquiry