Linear rails, also called linear guide rails or linear guideways, are used to support accurate and stable linear motion in CNC machines, automation equipment, robotics, medical devices, packaging machinery, and other industrial systems.
Different linear rail sizes are designed for different load levels, installation spaces, rigidity requirements, and application scenarios. An 8mm linear rail and a 35mm linear rail are both linear guide products, but they are selected for very different machines.
This guide compares common linear rail sizes from 8mm to 35mm, including 8mm, 9mm, 10mm, 12mm, 15mm, 16mm, 20mm, 25mm, and 35mm linear rails, to help buyers understand which size range is more suitable for different machine applications.
Linear Rail Size Overview: 8mm to 35mm
Linear rail size is usually selected according to load capacity, rigidity, travel length, installation space, motion accuracy, and the type of equipment. Smaller rails are suitable for compact and light-load systems, while larger rails are used for heavier loads and stronger rigidity requirements.
The table below gives a quick overview of common linear guide rail sizes and their typical application direction.
| Linear Rail Size | Size Category | Typical Load Direction | Common Applications | Selection Note |
|---|---|---|---|---|
| 8mm | Miniature | Light load | Micro sensors, portable instruments, compact inspection devices | For very limited installation space |
| 9mm | Miniature | Light load with slightly better rigidity | Small 3D printers, micro robots, small CNC auxiliary units | More stable than 8mm in compact systems |
| 10mm | Miniature / small | Light to moderate load | Small automation feed units, electronic assembly machines | Transition size for compact machinery |
| 12mm | Small | Light to moderate load | Small engraving machines, lab instruments, light-duty conveyors | Better load support than miniature rails |
| 15mm | Small-medium | Moderate load | Packaging machines, automation lines, laser auxiliary axes | Common compact industrial size |
| 16mm | Project-specific | Moderate load | Replacement or special machine structures | Confirm rail series and block compatibility |
| 20mm | Medium | Moderate to higher load | CNC machines, robotic arms, conveyors, industrial axes | Balanced size for many industrial machines |
| 25mm | Medium-heavy | Higher load / vibration | Gantry machines, heavy CNC equipment, automation platforms | Better rigidity and load distribution |
| 35mm | Heavy-duty | Heavy load / high rigidity | Large gantry machines, heavy conveyors, industrial equipment | Check frame rigidity and installation accuracy |
Miniature Linear Rails: 8mm, 9mm, 10mm, and 12mm
Miniature linear rails are designed for compact equipment with light load, short travel, and limited installation space. These sizes are often used in precision instruments, small automation devices, small 3D printers, and laboratory equipment.
8mm Linear Rail
The 8mm linear rail is one of the smallest commonly used guide rail sizes. It is suitable for applications where machine space is very limited and the load is light.
Typical applications include micro sensors, compact automation instruments, portable inspection equipment, and small positioning devices. It is not suitable for heavy load, large travel, or strong vibration conditions.
9mm Linear Rail
The 9mm linear rail provides slightly better rigidity and load support than an 8mm rail while still keeping a compact structure.
It is often used in small 3D printers, micro robotic joints, small auxiliary transmission systems, and compact CNC support axes. For buyers who need a little more stability than 8mm but still have limited installation space, 9mm can be a practical direction.
10mm Linear Rail
The 10mm linear rail can be seen as a transition size from miniature guide rails to small industrial guide rails. It is suitable for compact feed mechanisms, electronic assembly machines, and small automation equipment.
Compared with 8mm and 9mm rails, 10mm rails usually provide better load support and easier integration into small mechanical structures.
12mm Linear Rail
The 12mm linear rail is suitable for light to moderate load applications. It provides better support than miniature rails and is often used in small engraving machines, laboratory instruments, small conveyors, and compact automation platforms.
For buyers who need compact size but do not want the structure to be too light, 12mm is often a more stable option than smaller miniature rail sizes.
Small to Medium Linear Rails: 15mm, 16mm, and 20mm
Small to medium linear rails are widely used in industrial equipment. They provide a balance between size, rigidity, load capacity, and cost. This range is suitable for automation machines, CNC auxiliary axes, packaging equipment, and many general motion systems.
15mm Linear Rail
The 15mm linear rail, also called a 15mm linear guide rail, is a common compact industrial size. It is larger and more rigid than miniature guide rails while still being easy to install in medium-sized equipment.
Typical applications include packaging machinery, small automation lines, laser cutting auxiliary systems, compact transfer axes, and light CNC equipment. It is often selected when a machine needs moderate load capacity and stable repeatable motion.
16mm Linear Rail
The 16mm linear rail is less common than 15mm and 20mm in many standard guideway systems, but it may appear in project-specific machines, replacement applications, or structures where the original equipment requires this size.
When selecting a 16mm linear rail, buyers should carefully confirm rail series, block dimensions, mounting holes, rail height, and block compatibility. It should not be assumed to be interchangeable with 15mm or 20mm guide rails.
20mm Linear Rail
The 20mm linear rail is one of the most commonly used sizes for general industrial applications. It offers a good balance of load capacity, rigidity, installation convenience, and availability.
20mm linear guide rails are widely used in CNC machines, milling machines, robotic arms, conveyor systems, industrial automation equipment, and medium-load positioning platforms. For many machines, 20mm is a balanced choice between compact structure and stronger support.
Heavy-Duty Linear Rails: 25mm and 35mm
Heavy-duty linear rails are used when the machine needs stronger rigidity, higher load capacity, and better resistance to vibration or impact. These sizes are commonly selected for larger CNC equipment, gantry systems, industrial automation platforms, and heavy mechanical structures.
25mm Linear Rail
The 25mm linear rail is a transition size from medium-duty to heavier-duty applications. It is often used in gantry machines, heavy CNC equipment, large robotic systems, and industrial automation platforms.
Compared with smaller rail sizes, a 25mm linear guide rail can provide better load distribution and rigidity. It is useful when the machine has higher load, longer travel, or more vibration during operation.
35mm Linear Rail
The 35mm linear rail belongs to the heavy-duty linear rail category. It is often used in large gantry machines, heavy conveyors, port machinery, metallurgical equipment, and other industrial systems requiring high rigidity.
For 35mm guide rails, the final performance depends not only on the rail size. Machine frame rigidity, mounting surface flatness, block quantity, preload, accuracy grade, lubrication, and installation alignment should all be checked together.
How to Choose Linear Rail Size by Application
The correct linear rail size depends on the machine application and working condition. Smaller rails are not always worse, and larger rails are not always better. The best size is the one that matches the load, travel, accuracy, installation space, and cost requirement.
| Size Group | Suitable For | Not Ideal For |
|---|---|---|
| 8–12mm | Compact devices, light loads, short travel, small precision mechanisms | Heavy load, strong vibration, large gantry structures |
| 15–20mm | General automation, CNC auxiliary axes, packaging equipment, medium-load machines | Very heavy-duty cutting or large industrial structures |
| 25–35mm | Heavy-duty CNC, gantry systems, industrial automation platforms, large equipment | Very compact machines with limited space |
In practical selection, block type, rail length, number of blocks, load direction, accuracy grade, preload, lubrication method, and working environment should also be confirmed together.
DLY Linear Guide Rail Reference
DLY supplies linear guideways and matched linear guide blocks for different rail sizes and machine applications.
For practical selection, rail size, block type, load direction, travel length, accuracy grade, preload, installation space, and working environment should be confirmed together. DLY linear guideways generally use H and P accuracy grades, and higher grades such as SP and UP can also be provided according to project requirements.
Conclusion
From compact 8mm linear rails to heavy-duty 35mm linear guide rails, different rail sizes support different machine structures and load requirements. Miniature rails are suitable for light-load compact equipment, while larger rails are used for stronger rigidity and higher load capacity.
8mm, 9mm, 10mm, and 12mm rails are mainly used in miniature or small devices. 15mm, 16mm, and 20mm rails are suitable for many general industrial machines. 25mm and 35mm rails are selected for heavier equipment, gantry systems, and high-rigidity applications.
Choosing the right linear rail size helps improve machine stability, reduce unnecessary cost, and support reliable linear motion over long-term operation.
Need Help Checking Linear Rail Size?
If you are confirming linear rail size, block type, load condition, travel length, accuracy grade, or installation space, you can send the machine type, load, rail length, or drawing for reference.
Email: export@dlybearing.com


