Linear Guide Preload Levels: Light, Medium and Heavy Compared

Nov 04, 2025

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

Linear guide preload is an internal load applied between the rolling elements and raceways before the guide carries an external working load. It reduces or removes internal clearance, keeps the balls or rollers in contact with the raceways and increases the rigidity of the carriage.

Preload is commonly described as clearance, slight preload, light preload, medium preload or heavy preload. However, these names and their corresponding values are not universal. A "medium preload" from one linear guide series may not equal the same class from another manufacturer.

The correct preload level is the lowest level that provides the required rigidity and motion stability under the actual load. Choosing more preload than necessary increases friction, heat, drive force and sensitivity to installation errors without automatically improving positioning accuracy or load capacity.

Linear Guide Preload Levels and Carriage Rigidity

How Preload Is Created

In a ball-type profile rail guide, preload is generally produced by selecting balls that are slightly larger than the available space between the rail and carriage raceways. The balls remain elastically compressed at the contact points even before an external load is applied.

A roller linear guide uses the same basic principle, but the rolling elements are rollers rather than balls. Because roller guides have different contact geometry and rigidity characteristics, their preload classes should not be compared directly with those of ball guides.

Manufacturers may express preload as a class code, a clearance range or an approximate percentage of the guide's dynamic load rating. Always use the technical data for the selected series rather than applying a generic percentage to every guide.

Preload Level Comparison

Preload condition Rigidity Moving resistance Installation sensitivity Typical selection direction
Clearance or near-zero preload Lowest Lowest Relatively tolerant Low-friction transport and general motion
Light preload Improved Low to moderate Requires controlled mounting accuracy Precision automation and smooth positioning
Medium preload High Moderate High Machine axes with changing forces and rigidity requirements
Heavy preload Highest within the series Highest Very high Special high-rigidity systems with accurately machined mounting structures

This table shows general tendencies rather than universal specifications. The actual preload force, allowable installation error and moving resistance must be confirmed from the selected guide series.

Clearance or Near-Zero Preload

A clearance-type carriage has a small positive internal clearance, while a near-zero-clearance carriage is assembled to minimize play without applying significant preload. These configurations produce relatively low moving resistance and are less sensitive to minor mounting deviations.

They may be suitable when:

  • Low friction is more important than maximum rigidity
  • External loads and overturning moments are limited
  • The guide is used mainly for transport rather than precision processing
  • The mounting base cannot achieve the accuracy required by a preloaded system
  • Manual movement or a low-power drive is used

Clearance should not automatically be treated as a defect. A controlled clearance class can be appropriate for general conveying equipment, protective doors, adjustment mechanisms and other systems that do not require high resistance to deflection.

Light Preload

Light preload removes internal play while keeping moving resistance relatively low. It is often a practical starting point for automation equipment that requires stable positioning, smooth movement and moderate rigidity.

Typical selection conditions include:

  • Light or moderate loads
  • Relatively high travel speed
  • Frequent acceleration and deceleration
  • Low vibration requirements
  • Limited cutting or process force
  • Accurately machined but not exceptionally rigid mounting structures

Light preload may be used in inspection platforms, dispensing equipment, assembly machines, packaging systems and pick-and-place axes. The application name alone does not determine the preload; carriage spacing, load position and moment load must also be considered.

Medium Preload

Medium preload produces greater internal contact force and higher carriage rigidity. It is often selected when the guide must resist changing external forces, vibration or displacement caused by an overhung load.

It may be appropriate for:

  • CNC feed axes exposed to machining forces
  • Automation platforms carrying offset loads
  • Equipment with frequent direction changes
  • Applications requiring lower elastic deflection
  • Systems exposed to moderate vibration or impact

The machine base and mounting shoulders must be sufficiently accurate and rigid. Otherwise, rail misalignment can add unintended internal load on top of the specified preload.

Heavy Preload

Heavy preload is intended for applications in which high rigidity and minimal elastic displacement are essential. It creates a substantial internal load before the guide carries the machine's external working load.

This level should not be selected simply because the machine carries a heavy load. A larger guide size, wider rail spacing, additional carriages or a roller guide may provide a better solution than applying excessive preload to a smaller ball guide.

Heavy preload may be considered when:

  • Very low deflection is required under changing load
  • The machine structure and mounting surfaces are precision machined
  • The drive system can overcome the higher resistance
  • Operating temperature and lubrication can be controlled
  • The preload is included in the load and life assessment

Heavy preload is not automatically ideal for high-speed operation. At higher speed, increased internal resistance can contribute to additional heat and drive-force demand. The permissible speed and preload combination must be verified for the specific guide.

Preload and Rigidity

Rigidity describes how much a carriage deflects under an applied load. When a guide has internal clearance, part of the initial displacement may occur while the rolling elements move into full contact with the raceways. Preload establishes contact in advance and reduces this initial movement.

The benefit is especially important when the working point is located far above or outside the carriage pattern. A small displacement at the guide can produce a larger positioning change at the end of an overhung tool, robot arm or inspection sensor.

Preload improves carriage rigidity, but system rigidity also depends on:

  • Rail size and cross-section
  • Ball or roller contact geometry
  • Number and spacing of carriages
  • Distance between parallel rails
  • Machine base and mounting-plate rigidity
  • Bolt connection and mounting-surface accuracy

Increasing preload cannot compensate for a flexible machine base, insufficient carriage spacing or an incorrectly sized guide.

Preload Does Not Increase Load Rating

Preload can make a guide feel more stable under load, but it does not increase the manufacturer's published dynamic or static load rating. The guide's rated capacity is determined by its rolling elements, raceways, contact geometry, material and dimensions.

Preload is itself an internal load. It must be considered together with external radial loads, reverse loads and roll, pitch and yaw moments when checking service life and static safety.

If the selected guide does not meet the required load rating, the solution is normally to change the guide size, carriage type, carriage quantity or guide arrangement-not simply to select a heavier preload.

Preload vs Accuracy Grade

Preload class and accuracy grade describe different properties.

Parameter What it controls What it does not guarantee
Preload class Internal clearance, contact force and carriage rigidity Rail height, width or running parallelism tolerance
Accuracy grade Dimensional and running accuracy of the rail and carriage A specific internal preload or system rigidity

For example, selecting a DLY H- or P-accuracy guide does not by itself specify the preload. The required accuracy and preload should be confirmed separately according to the machine's positioning and rigidity requirements.

For a more detailed explanation of guide accuracy, see how to select a linear guide accuracy grade.

Ball Guide vs Roller Guide Preload

Ball-type and roller-type linear guides respond differently to preload because their contact structures are different.

Guide type General characteristic Preload consideration
Ball linear guide Smooth movement, high efficiency and broad speed range Balance rigidity against friction, speed and installation tolerance
Roller linear guide Higher rigidity and stronger resistance to deformation Use the series-specific preload class and account for stricter mounting requirements

DLY HD series uses recirculating balls for heavy-duty general motion, while DLY RD series uses rollers for applications requiring higher rigidity and lower deformation. A heavily preloaded HD guide should not automatically be treated as equivalent to an RD roller guide.

Where very high rigidity is required, compare the complete heavy-load linear guide options rather than selecting preload alone.

Installation Becomes More Critical

A carriage with clearance can accommodate a small amount of rail or mounting deviation before strong internal constraint develops. A preloaded carriage has much less available movement, so the same installation error can produce a larger unwanted internal load.

Important installation factors include:

  • Flatness of each rail mounting surface
  • Parallelism between two rails
  • Height difference between parallel mounting surfaces
  • Straightness of the locating shoulder
  • Bolt-tightening sequence and torque
  • Rigidity of the moving plate connecting multiple carriages

If a guide moves smoothly before the moving plate is tightened but becomes heavy or uneven afterward, the problem may be mounting distortion rather than excessive factory preload.

Detailed mounting checks are available in how to install linear motion guides.

Signs the Preload May Be Too High

High movement resistance does not automatically prove that the factory preload is excessive. Misalignment, contamination, damaged seals, unsuitable lubrication and uneven mounting can produce similar symptoms.

Possible warning signs include:

  • Drive force is higher than expected across the full stroke
  • The carriage temperature rises during operation
  • Movement becomes significantly heavier after mounting
  • The motor current is high even under low external load
  • The guide cannot reach the required acceleration smoothly
  • Wear marks develop unevenly across the raceways

Before changing the preload class, compare the guide's resistance before and after assembly and inspect rail alignment, mounting surfaces, lubrication and seals.

How to Select the Preload Level

Preload selection should begin with the required system behavior rather than an application label.

  1. Calculate external loads and moments. Include the load position, acceleration, process force and roll, pitch and yaw moments.
  2. Define allowable deflection. Determine how much carriage and system displacement the application can accept.
  3. Check guide size and arrangement first. Confirm that the rail size, carriage quantity and spacing provide sufficient capacity and rigidity.
  4. Evaluate speed and drive force. Higher preload increases resistance, so the motor and transmission must be able to move the axis reliably.
  5. Assess mounting accuracy. Do not specify a preload level that the machine base and assembly process cannot support.
  6. Use the series-specific preload table. Confirm the manufacturer's preload code, force range and application restrictions.
Practical selection principle: Use the lowest preload class that satisfies the required rigidity, deflection and vibration performance under the actual load.

Application Selection Guide

Application condition Starting preload direction Confirm before selection
General transport with low moment load Clearance or near-zero preload Allowable play and carriage orientation
Fast automation with moderate positioning requirements Light preload Acceleration, friction and motor capacity
CNC or processing axis with changing force Light to medium preload Cutting force, deflection and mounting rigidity
High-rigidity machine-tool axis Medium preload or roller guide evaluation System rigidity, heat and installation accuracy
Heavy load with no exceptional rigidity requirement Select guide size before increasing preload Load rating, moment capacity and carriage quantity
Very low deflection under alternating load Medium or heavy preload after calculation Life, drive force, lubrication and mounting tolerances

Conclusion

Linear guide preload removes internal clearance and improves carriage rigidity, but each increase in preload also raises internal load, movement resistance and installation sensitivity.

Clearance or light preload is suitable when smooth motion and lower friction are priorities. Medium preload is often used when an axis must resist changing forces and limit elastic displacement. Heavy preload should be reserved for applications that genuinely require very high rigidity and have the mounting accuracy, drive capacity and lubrication conditions to support it.

DLY supplies HD ball-type, ED low-profile, MD miniature and RD roller-type linear guideways with H and P ,SP,UP accuracy options. Required preload, rail size, carriage type and accuracy grade should be confirmed separately according to the machine load and rigidity requirements.

← Back to DLY Blog

Send Inquiry