The DLY SCM ball screw uses a cylindrical single nut with an external mounting thread instead of a conventional mounting flange. The nut can be installed into a threaded nut holder, making the series suitable for assemblies where a round nut body is easier to integrate than an SFU-style flange.
SCM models cover nominal screw diameters from 16 to 50 mm and leads of 4, 5 or 10 mm. Standard supply uses an S55C rolled screw shaft, a 20CrMo nut and C7 accuracy. C5 ground accuracy, left-hand thread, custom screw length and drawing-based end machining are available subject to specification confirmation.
How an SCM Ball Screw Nut Is Mounted
An SCM nut has a round, non-flanged body. One end of the nut includes an external mounting thread, such as M22×1.5P, M40×1.5P or M72×1.5P depending on the model. The machine designer provides a corresponding threaded nut holder or mounting component.
This arrangement differs from an SFU nut, which is normally fixed through holes in an external flange. The SCM structure avoids the radial space required by a flange, but the nut holder must be designed for the correct external thread, nut diameter, mounting length and tightening method.
SCM Ball Screw Dimensions
Use the following values with the SCM dimension drawing. Slash-separated values are retained from the original specification and should be checked against the required configuration before machining the nut holder.

| Model | d | l | Da | D | External Thread A | B | L | Oil Hole Q | L1 | Circuits n |
|---|---|---|---|---|---|---|---|---|---|---|
| SCM1604-3 | 16 | 4 | 2.381 | 29 | M22×1.5P | 8 | 32 | - | - | 3 |
| SCM1605-3 | 16 | 5 | 3.175 | 28/32 | M27×1.5P | 16 | 50 | M6 | 6.5 | 4 |
| SCM1605-4 | 16 | 5 | 3.175 | 28/32 | M30×1.5P | 16 | 56 | M6 | 6.5 | 4 |
| SCM2005-3 | 20 | 5 | 3.175 | 36/38 | M35×1.5P | 16.5 | 59.5 | M6 | 7 | 3 |
| SCM2005-4 | 20 | 5 | 3.175 | 36/38 | M35×1.5P | 16.5 | 59.5 | M6 | 7 | 4 |
| SCM2505-3 | 25 | 5 | 3.175 | 40/42 | M40×1.5P | 17 | 50 | M6 | 7 | 3 |
| SCM2505-4 | 25 | 5 | 3.175 | 40/42 | M40×1.5P | 17 | 60 | M6 | 7 | 4 |
| SCM2510-3 | 25 | 10 | 4.762 | 40/42 | M40×1.5P | 17 | 80 | M6 | 10 | 3 |
| SCM2510-4 | 25 | 10 | 4.762 | 40/42 | M40×1.5P | 17 | 90 | M6 | 10 | 4 |
| SCM3205-4 | 32 | 5 | 3.175 | 50/52 | M48×1.5P | 19 | 60 | M6 | 7 | 4 |
| SCM3210-4 | 32 | 10 | 6.35 | 50/52 | M48×1.5P | 19 | 99/93 | M6 | 12 | 4 |
| SCM4005-4 | 40 | 5 | 3.175 | 63/58 | M56×1.5P | 19 | 55/59 | M8 | 6 | 4 |
| SCM4010-4 | 40 | 10 | 6.35 | 63/65 | M60×1.5P | 27 | 93/102 | M8 | 12 | 4 |
| SCM5005-4 | 50 | 5 | 3.175 | 65/75 | M72×1.5P | 19 | 55/65 | M8 | 6 | 4 |
| SCM5010-4 | 50 | 10 | 6.35 | 75/78 | M72×1.5P | 29 | 93/104 | M8 | 12 | 4 |
Dimension unit: mm. d = nominal screw diameter; l = lead; Da = ball diameter; D = nut outside diameter; A = external mounting thread; B = threaded mounting-end length; L = total nut length; Q = oil-hole specification; L1 = oil-hole position; n = number of ball circuits.
SCM Ball Screw Load Ratings
| Model | Dynamic Load Ca (kgf) | Static Load Coa (kgf) | Stiffness K (kgf/μm) |
|---|---|---|---|
| SCM1604-3 | 435 | 920 | 16 |
| SCM1605-3 | 765 | 1240 | 17 |
| SCM1605-4 | 980 | 1650 | 23 |
| SCM2005-3 | 860 | 1710 | 22 |
| SCM2005-4 | 1100 | 2280 | 28 |
| SCM2505-3 | 980 | 2300 | 32 |
| SCM2505-4 | 1250 | 3070 | 33 |
| SCM2510-3 | 1620 | 3205 | 26 |
| SCM2510-4 | 2070 | 4270 | 35 |
| SCM3205-4 | 1400 | 4080 | 41 |
| SCM3210-4 | 3340 | 7080 | 45 |
| SCM4005-4 | 1575 | 5290 | 49 |
| SCM4010-4 | 3850 | 9470 | 53 |
| SCM5005-4 | 1730 | 6763 | 60 |
| SCM5010-4 | 4390 | 12400 | 65 |
Ca and Coa are catalog load ratings in kgf; K is catalog axial stiffness in kgf/μm. They should be used with the actual axial load, speed, stroke, duty cycle and lubrication conditions when checking service life.
SCM Ball Screw vs SFU Ball Screw
| Comparison | SCM Ball Screw | SFU Ball Screw |
|---|---|---|
| Nut body | Round cylindrical body without mounting flange | Standard nut body with external flange |
| Mounting method | External thread on the nut body | Bolts through flange mounting holes |
| Nut-holder design | Requires a matching female thread and suitable locking method | Requires a flange mounting face and bolt pattern |
| Selection priority | External thread, nut OD and available cylindrical space | Flange diameter, bolt pattern and mounting-face space |
If the machine already has a conventional flange mounting surface, see the SFU ball screw. SCM is selected when its cylindrical externally threaded nut is better suited to the planned nut holder.
Request an SCM Ball Screw Quote
Send the SCM model, screw length, quantity, accuracy grade, nut mounting requirements, wiper requirement and shaft-end drawing. DLY will confirm the cylindrical threaded nut dimensions before quotation.
Contact DLYHot Tags: scm ball screw, China scm ball screw manufacturers, suppliers, factory, ball screw coupler, 12mm ball screw, ball screw actuator, actuator ball screw, stepper ball screw, ball screws and actuators co

