DLY Linear Rail Shaft Rod for Replacement, Distribution and Repeat Supply
A linear rail shaft rod is a straight, hardened and chrome-plated round rod used together with linear bearings for smooth straight-line motion. It is one of the simplest and most widely interchangeable linear motion components because the shaft diameter normally matches standard LM-series bearing bores.
DLY supplies linear rail shaft rods for maintenance teams, distributors, resellers and equipment builders who need stable sizes, reliable batch supply and simple replacement matching. For many repair or stocking orders, buyers already know the required diameter and length. The key is to receive a shaft rod that matches the existing bearing, installation length and end condition without unnecessary re-engineering.
Common options include GCr15 bearing steel and C45 high-carbon steel, chrome-plated surface, g6 or h7 tolerance, standard length, cut-to-length service and drawing-based end machining. If you need to replace a worn rod, restock common diameters, or prepare repeated batch supply, DLY can help confirm the suitable shaft rod according to your bearing model, drawing or sample photo.
Linear Rail Shaft Rod vs Precision Linear Shaft vs Round Linear Shafting
DLY's linear shaft range covers different buying situations under the same product family. Choosing the right page helps buyers avoid paying for capability they do not need, while also preventing under-specification when the machine structure requires tighter control.
This page focuses on standard shaft rods for replacement, distributor stocking and repeated supply. If your project needs a more engineering-focused shaft with tighter straightness, hardness and tolerance requirements, the precision linear shaft page is a better match. If you need the shaft supplied as part of a bearing-and-shaft motion unit, round linear shafting is usually more suitable.
| Product Page | Best For | Typical Buyer Concern |
|---|---|---|
| Linear Rail Shaft Rod | Replacement, spare parts, distributor stocking and repeat orders | Correct diameter, correct length, bearing match, stable batch supply |
| Precision Linear Shaft | New OEM designs where shaft accuracy directly affects machine repeatability | Straightness, surface hardness, tolerance grade and engineering specification |
| Round Linear Shafting | Complete shaft-and-bearing linear motion assemblies | Matched bearing movement, system assembly and application-level motion design |
In short, choose linear rail shaft rod when you need standard rods for replacement and repeat supply, precision linear shaft when the shaft itself is part of a precision-critical design, and round linear shafting when you need a complete bearing-and-shaft motion unit.
Matching a Replacement Linear Shaft Rod Without Guesswork
The most common reason buyers need a linear rail shaft rod is not always a new design. In many cases, the machine is already running, and one worn or damaged rod needs to be replaced quickly. In that situation, the shaft rod itself is not the difficult part. The important point is making sure the new rod fits the existing bearing, support and machine structure.
Diameter match is the first step. The shaft diameter should match the inner diameter of the existing linear bearing. If you can read the bearing model number, such as LM20UU, that model usually tells us the required shaft diameter more reliably than measuring an old worn rod.
Length should be confirmed carefully. Some replacement shafts are not standard full lengths because they have already been cut or processed for a machine frame. When replacing an existing rod, it is better to confirm both the overall length and the working length, especially when the shaft has stepped ends or mounting holes.
End condition also matters. Plain cut ends suit many replacement and stocking orders. If the original rod has axial tapped holes, radial holes, stepped ends, grooves, external threads, flats or keyways, these details should be marked on the drawing or shown in a clear photo before quotation.
Linear Rail Shaft Rod Parameters
The following table summarizes the common supply range for DLY linear rail shaft rods. Exact availability may vary according to diameter, length, processing requirement and order quantity.
| Product Name | Linear Rail Shaft Rod / Linear Rod / Chrome Plated Shaft Rod |
| Common Diameter | Φ6, Φ8, Φ10, Φ12, Φ13, Φ16, Φ20, Φ25, Φ30, Φ35, Φ40, Φ50, Φ60 and other sizes by inquiry |
| Main Material | GCr15 bearing steel and C45 high-carbon steel |
| Surface Treatment | Chrome plated, ground and polished surface |
| Tolerance | g6 or h7, selected according to bearing fit and application requirement |
| Length | Standard length, short cut rods and customer-required length within processing range |
| Custom Processing | Radial holes, axial tapped holes, stepped ends, slots, threads, flats and keyway machining according to drawing |
| Matching Parts | LM linear bearings, SC linear bearing blocks, SK shaft supports, SBR/TBR supported rails and linear bearing assemblies |
| Typical Lead Time | Common diameters may be available from stock or short production runs. Custom-processed or non-standard lengths should be confirmed at quotation. |
Diameter, tolerance and surface condition influence how smoothly the rod works with the linear bearing. For replacement orders, the existing bearing model is often the fastest way to confirm the correct shaft size. For repeated distributor orders, DLY can help maintain consistent batches so that the same sizes can be reordered without rechecking every detail from the beginning.
For engineering-focused shaft accuracy, please also see Precision Linear Shaft. For complete shaft-and-bearing motion assemblies, please see Round Linear Shafting.
Technical Specification Reference for Chrome Plated Linear Shaft Rods
DLY chrome plated linear shaft rods are available in common diameters, standard lengths and cut-to-length options for linear bearing assemblies. The drawing below shows the typical shaft structure, model coding, material type, surface treatment and size reference, helping you check the basic specifications before sending an inquiry or replacement request.
| Main Material | GCr15 bearing steel; C45 high-carbon steel available for cost-effective applications |
| Surface Hardness | HRC62 ± 2 for GCr15 bearing steel shaft rods |
| Tolerance Options | h6, h7 or g6 according to bearing fit and application requirement |
| Surface Roughness | Ra 0.4–0.8 |
| Effective Hardened Layer | Approximately 0.6 mm–3.5 mm, depending on shaft diameter |
| Straightness Reference | Within 5 μm per 100 mm as a technical reference; confirm final requirement before order |
| Standard Length Range | 1000 mm–7000 mm; short cut-to-length rods can be supplied according to request |
| Common Model Type | WDCS chrome plated bearing steel shaft; WFCS chrome plated high-carbon steel shaft |
| Model Coding Example | WDCS25-500L means a chrome plated solid shaft rod with 25 mm nominal diameter and 500 mm total length |
Common Diameter, Hardened Layer and Weight Reference
| Model | Shaft Diameter | g6 Tolerance Reference | Roundness Reference | Effective Hardened Layer | Weight Reference |
|---|---|---|---|---|---|
| WDCS 3 | 3 mm | -0.002 / -0.008 mm | ≤ 2 μm | 0.6 mm | 0.06 kg/m |
| WDCS 4 | 4 mm | -0.002 / -0.008 mm | ≤ 3 μm | 0.8 mm | 0.10 kg/m |
| WDCS 5 | 5 mm | -0.004 / -0.012 mm | ≤ 3 μm | 0.8 mm | 0.15 kg/m |
| WDCS 6 | 6 mm | -0.004 / -0.012 mm | ≤ 3 μm | 0.8 mm | 0.22 kg/m |
| WDCS 8 | 8 mm | -0.005 / -0.014 mm | ≤ 3 μm | 1.0 mm | 0.40 kg/m |
| WDCS 10 | 10 mm | -0.005 / -0.014 mm | ≤ 4 μm | 1.0 mm | 0.62 kg/m |
| WDCS 12 | 12 mm | -0.006 / -0.017 mm | ≤ 4 μm | 1.0 mm | 0.89 kg/m |
| WDCS 13 | 13 mm | -0.006 / -0.017 mm | ≤ 4 μm | 1.0 mm | 1.04 kg/m |
| WDCS 16 | 16 mm | -0.006 / -0.017 mm | ≤ 4 μm | 1.5 mm | 1.58 kg/m |
| WDCS 20 | 20 mm | -0.007 / -0.020 mm | ≤ 5 μm | 1.5 mm | 2.47 kg/m |
| WDCS 25 | 25 mm | -0.007 / -0.020 mm | ≤ 5 μm | 1.5 mm | 3.85 kg/m |
| WDCS 30 | 30 mm | -0.007 / -0.020 mm | ≤ 5 μm | 2.0 mm | 5.55 kg/m |
| WDCS 35 | 35 mm | -0.007 / -0.020 mm | ≤ 6 μm | 2.0 mm | 7.55 kg/m |
| WDCS 40 | 40 mm | -0.009 / -0.025 mm | ≤ 6 μm | 2.5 mm | 9.87 kg/m |
| WDCS 50 | 50 mm | -0.009 / -0.025 mm | ≤ 6 μm | 2.5 mm | 15.40 kg/m |
| WDCS 60 | 60 mm | -0.010 / -0.029 mm | ≤ 8 μm | 3.0 mm | 22.20 kg/m |
| WDCS 80 | 80 mm | -0.010 / -0.029 mm | ≤ 8 μm | 3.0 mm | 39.50 kg/m |
How to Order the Right Linear Shaft Rod
For a fast and accurate quotation, please send the shaft diameter, length, quantity, material, tolerance, machining drawing and matching bearing model. If you do not have a formal drawing, a clear photo of the existing rod, bearing model and approximate length can help us make an initial recommendation.
01 - Confirm the Bearing Model or Shaft Diameter
The shaft rod should match the bore of the linear bearing. For example, LM20UU normally works with a 20 mm shaft rod. If the old shaft is worn, the bearing model is usually a better reference than measuring only the used rod surface.
02 - Choose Standard Length or Cut-to-Length Supply
Standard lengths are suitable for distributors and buyers who cut or process shafts locally. Cut-to-length rods are more convenient for machine builders, repair teams and buyers who need parts ready for direct installation.
03 - Mark Any End Machining Requirements
Plain cut ends are common for stock rods. If your installation needs tapped holes, stepped ends, grooves, threads, flats or keyways, please send a drawing or sketch before quotation. This avoids repeated confirmation and helps DLY check whether the processing method is suitable for the requested diameter and length.
04 - Tell Us Whether It Is a One-Time Order or Repeat Supply
A one-time replacement order can be quoted and shipped as a single batch. If you are a distributor or maintenance team that reorders the same sizes regularly, DLY can help set up repeat supply arrangements for common diameters and agreed lead-time windows.
Where Linear Rail Shaft Rods Are Commonly Used
Linear rail shaft rods are widely used in simple and cost-effective linear motion structures. They are especially suitable when the machine design already uses round shafts and linear bearings, or when buyers need practical replacement parts that can be matched by diameter and length.
- 3D printers and small CNC equipment: Used as guide rods for light-load linear movement, compact axes and spare part replacement.
- Packaging and automation machinery: Used in sliding units, positioning frames, transfer structures and small actuating mechanisms.
- Repair and maintenance projects: Common rod sizes can be kept in stock by distributors and maintenance teams for fast replacement.
- Linear bearing assemblies: Matched with LM bearings, SC bearing blocks and SK shaft supports for low-friction movement.
- DIY and light machinery: Suitable for simple linear rails where cost, availability and installation flexibility are important.
- OEM equipment: Custom-processed rods can be supplied for repeated assembly projects according to drawings.
Batch Supply for Distributors and Resellers
Distributors often need the same several shaft diameters repeatedly rather than a one-off custom project. For these buyers, DLY can support regular supply of common rod sizes, mixed-size batch orders and simple reorder communication after the initial specification is confirmed.
For recurring orders, buyers can confirm a stable list of diameters, lengths, materials, tolerance requirements and packaging preferences. After that, future orders can be processed more efficiently because the main specifications have already been agreed.
Need a Linear Shaft Rod Quotation?
Please send the shaft diameter, length, quantity, material, tolerance, end machining requirement and bearing model. If you only have a worn sample or machine photo, DLY can also help check the likely matching shaft size before quotation.
WhatsApp: +86 166 0578 8856 | Email: dlyexport2@dlybearing.com
Send Your Bearing Model or DrawingFAQ About Linear Rail Shaft Rods
Q: Can you cut the shaft rod to my required length?
A: Yes. DLY can supply standard lengths or cut rods according to your requested length. For replacement orders, please confirm whether the length is the total length or the working installation length.
Q: Can the rod be used with LM linear bearings?
A: Yes. The shaft rod diameter should match the inner diameter of the LM linear bearing. Sending the bearing model number is usually enough for DLY to confirm the correct rod size.
Q: What information is needed for a quotation?
A: The main information includes diameter, length, quantity, material, tolerance, machining requirement and destination country. A bearing model number, drawing or photo of the existing rod can also help if you do not have complete specifications.
Q: Can you process holes or threads on the shaft rod?
A: Yes. DLY can process radial holes, axial tapped holes, threads, stepped ends, slots, flats and keyways according to drawings. The processing method should be confirmed according to shaft diameter, length and installation requirement.
Q: I do not have the original specification sheet. Can you match a rod from a worn sample or photo?
A: In many cases, yes. The bearing model number is the most reliable reference. If the model is not visible, a clear photo with a ruler or caliper reading, together with the approximate length and machine application, can help DLY propose a matching size for confirmation.
Q: What is the minimum order quantity for standard diameter rods?
A: MOQ depends on diameter, length, processing requirement and current stock condition. Common sizes generally have more flexible supply than special lengths or specially machined rods. Please send your required size and quantity for confirmation.
Q: Can we order mixed shaft sizes in one batch?
A: Yes. Mixed-size batches are possible, especially for distributors restocking several common diameters in one shipment. Please provide the size list and quantity for each diameter so DLY can quote the combined order.
Hot Tags: linear rail shaft rod, China linear rail shaft rod manufacturers, suppliers, factory, profile rail linear guides, linear ball bearings and shafts, linear bearing 30mm shaft, curved linear guide, linear motion rail guide, 16mm Linear Shaft

