ED Low Profile Guide Block
Zhejiang DLY Automation Manufacturing Co., Ltd. (DLY) manufactures the ED Low Profile Guide Block at its own factory in Lishui, Zhejiang, China. We supply EDH square blocks and EDW flange blocks directly to OEM machine builders, distributors, wholesalers and industrial maintenance buyers. Standard sizes are available from stock, and requirements outside the standard range are handled against drawings or samples.
Send InquiryAbout the Manufacturer
DLY has 20+ years of manufacturing experience and operates a factory of more than 30,000 m² with over 200 employees, including 25 in quality inspection. Linear guideways and guide blocks are made alongside ball screws, nuts and linear shafts. Monthly capacity is 60,000 m of guideways and 40,000 blocks. These are factory-wide figures, not figures for the ED series alone.
Our ISO 9001 certification (valid to 2027-09-25) covers the production and service of rolling linear guideway assemblies.
EDH and EDW Series Selection
DLY ED low profile guide blocks are mainly available in EDH square type and EDW flange type. The model suffix helps identify load type and mounting direction.
| Model Type | Block Structure | Load Type | Mounting Method | Best For |
|---|---|---|---|---|
| EDH-SA | Square low profile block | Medium load | Mounting from top | Compact automation axes and small machine structures |
| EDH-CA | Square low profile block | Heavy load | Mounting from top | Compact equipment requiring stronger rigidity |
| EDW-SA | Flange low profile block | Medium load | Mounting from top | Plate-mounted compact guide systems |
| EDW-CA | Flange low profile block | Heavy load | Mounting from top | Compact machines needing higher load support |
| EDW-SB | Flange low profile block | Medium load | Mounting from bottom | Special layouts where top mounting is not preferred |
| EDW-CB | Flange low profile block | Heavy load | Mounting from bottom | Compact equipment with bottom-locking requirements |
Product Display
For accurate model selection, please confirm rail width, block type, load grade, accuracy grade, preload requirement and mounting dimensions before replacement or new equipment assembly.
ED low profile guide blocks for compact automation and precision motion systems.
Four-row ball circulation structure for smooth and stable linear motion.
EDH square blocks and EDW flange blocks in common rail sizes.
EDW flange block with a wider mounting surface for machine plates.General Specification Range
| Product Type | ED Low Profile Guide Block / ED Sliding Block / Low Profile Linear Guide Carriage |
| Available Series | EDH square type, EDW flange type |
| Load Type | Medium load and heavy load |
| Mounting Type | Top mounting; selected EDW models support bottom mounting |
| Rail Width Range | 15mm, 20mm, 23mm, 28mm |
| Overall Height Range | 24mm to 42mm depending on model |
| Maximum Rail Length | Up to 4000mm |
| Material | S55C guide rail and block body; PA6 ball recirculator |
| Rolling Element | Steel balls |
| Accuracy Grade | C, H, P, SP, UP |
| Typical Applications | Automation equipment, semiconductor machines, laser machines, packaging machinery, precision measuring equipment and compact motion systems |
EDH Square Low Profile Guide Block Models
EDH series uses a square block structure with top mounting. SA models are medium-load type, while CA models are heavy-load type for compact equipment requiring stronger rigidity.
| Model | Rail Width | Block L×W×H | Overall Height | Dynamic Load C | Static Load C₀ | Block Weight |
|---|---|---|---|---|---|---|
| EDH15SA | 15mm | 40.1×34×19.5mm | 24mm | 5.35kN | 9.4kN | 0.09kg |
| EDH15CA | 15mm | 56.8×34×19.5mm | 24mm | 7.83kN | 16.19kN | 0.15kg |
| EDH20SA | 20mm | 50×42×22mm | 28mm | 7.23kN | 12.74kN | 0.15kg |
| EDH20CA | 20mm | 69.1×42×22mm | 28mm | 10.31kN | 21.16kN | 0.24kg |
| EDH25SA | 23mm | 59.1×48×26mm | 33mm | 11.4kN | 19.5kN | 0.25kg |
| EDH25CA | 23mm | 82.6×48×26mm | 33mm | 16.27kN | 32.4kN | 0.41kg |
| EDH30SA | 28mm | 69.5×60×32mm | 42mm | 16.42kN | 28.1kN | 0.45kg |
| EDH30CA | 28mm | 98.1×60×32mm | 42mm | 23.7kN | 47.46kN | 0.75kg |
EDW Flange Low Profile Guide Block Models
EDW series uses a flange block structure with a wider mounting surface. SA and CA models are mounted from top, while SB and CB models are used for bottom-mounting layouts.
| Model | Mounting | Rail Width | Block L×W×H | Overall Height | Dynamic Load C | Static Load C₀ |
|---|---|---|---|---|---|---|
| EDW15SA | Top | 15mm | 40.1×52×19.5mm | 24mm | 5.35kN | 9.4kN |
| EDW15CA | Top | 15mm | 56.8×52×19.5mm | 24mm | 7.83kN | 16.19kN |
| EDW20SA | Top | 20mm | 50×59×22mm | 28mm | 7.23kN | 12.74kN |
| EDW20CA | Top | 20mm | 69.1×59×22mm | 28mm | 10.31kN | 21.16kN |
| EDW25SA | Top | 23mm | 59.1×73×26mm | 33mm | 11.4kN | 19.5kN |
| EDW25CA | Top | 23mm | 82.6×73×26mm | 33mm | 16.27kN | 32.4kN |
| EDW30SA | Top | 28mm | 69.5×90×32mm | 42mm | 16.42kN | 28.1kN |
| EDW30CA | Top | 28mm | 98.1×90×32mm | 42mm | 23.7kN | 47.46kN |
| EDW15SB / EDW15CB | Bottom | 15mm | 40.1×52×19.5mm / 56.8×52×19.5mm | 24mm | 5.35 / 7.83kN | 9.4 / 16.19kN |
| EDW20SB / EDW20CB | Bottom | 20mm | 50×59×22mm / 69.1×59×22mm | 28mm | 7.23 / 10.31kN | 12.74 / 21.16kN |
| EDW25SB / EDW25CB | Bottom | 23mm | 59.1×73×26mm / 82.6×73×26mm | 33mm | 11.4 / 16.27kN | 19.5 / 32.4kN |
| EDW30SB / EDW30CB | Bottom | 28mm | 69.5×90×32mm / 98.1×90×32mm | 42mm | 16.42 / 23.7kN | 28.1 / 47.46kN |
Note: Model dimensions and load ratings should be confirmed together with rail length, accuracy grade, preload and mounting direction before quotation.
Dimension Drawings and Specification Reference
EDH-SA / EDH-CA Square Low Profile Guide Block

EDH square block dimension drawing and load rating reference.
EDW-SA / EDW-CA Flange Low Profile Guide Block

EDW flange block dimension drawing for top-mounting structures.
EDW-SB / EDW-CB Bottom-Mounting Flange Guide Block

EDW bottom-mounting block reference for special compact machine layouts.
EDH and EDW Model Display
Model display for EDH square blocks and EDW flange blocks in common sizes.
Top Mounting and Bottom Mounting Structures
ED low profile guide blocks can be selected according to machine mounting direction. Top mounting is commonly used for standard machine plates, while bottom mounting helps when the block must be fixed from the opposite side or when the upper space is limited.
Cross-section reference for ED low profile guide block structure.
Top mounting structure for standard ED guide block installation.
Bottom mounting structure for selected EDW flange guide blocks.
ED vs HD vs RD Linear Guide Blocks
ED, HD and RD series should be selected according to installation height, load requirement and rigidity demand. ED is the compact low-profile option; HD is the standard/heavy-duty ball guide block series; RD is the roller-type series for higher rigidity and heavier load.
| Series | Main Feature | Best For | Selection Priority |
|---|---|---|---|
| ED Series | Low-profile ball guide block with shorter block length | Compact automation, semiconductor equipment, small motion systems | Lower height and space saving |
| HD Series | Standard and heavy-duty ball guide block structure | CNC, laser machines, general automation, packaging machinery | Higher rigidity than compact low-profile structures |
| RD Series | Roller-type guide block for higher rigidity and load capacity | Machine tools, heavy-duty axes, precision equipment | Heavy load and high rigidity |
Applications

Semiconductor and precision measuring equipment: compact axes where height is restricted.
Laser machines and packaging equipment: space-saving linear motion in the machine frame.
Automation equipment: square or flange mounting, depending on the interface.
FAQ
Q: Why does the size designation (for example EDH30) not match the rail width?
A: Size designations (15, 20, 25, 30) and actual rail widths (15, 20, 23, 28 mm) are separate numbers. Order by the full model code and confirm the rail width from the dimension drawing.
Q: I only have an old block, with no drawing. Can you still match it?
A: Yes. A sample or clear photographs plus the existing part number are enough to start. We compare the mounting interface dimensions before quoting.
Q: Can I get inspection records with an order?
A: Factory inspection reports include dimensional records. State the requirement in your inquiry so the records are prepared with the order.
Q: Can I add other components to the same inquiry?
A: Yes. DLY also makes ball screws, ball nuts and linear shafts. Send one consolidated list for an equipment build or purchasing schedule.
Related Products
For other linear block and linear guideway requirements, you can also check related DLY product pages.
Need Help Selecting an ED Low Profile Guide Block?
Send DLY your ED block model, rail width, rail length, mounting direction, accuracy grade, preload requirement, quantity and application. Our team can help confirm a suitable EDH or EDW low profile guide block before quotation.
Hot Tags: ED Low Profile Guide Block, China ED Low Profile Guide Block manufacturers, suppliers, factory, slide block bearing, linear bearing slide block, linear sanding blocks, Mgn12c Block

