Flange H Linear Bearing Aluminum Slide for Round Shaft Linear Motion
The DLY flange H linear bearing aluminum slide is a compact flanged linear bearing unit used with round linear shafts. It combines a linear bearing sleeve and an H-type mounting flange, allowing the bearing to be fixed directly to a plate, bracket, or moving carriage without a separate bearing housing.
Compared with a plain cylindrical linear bearing, the flange design provides a stable mounting face and helps control rotation of the bearing body during operation. This makes it suitable for small automation mechanisms, light-duty guide systems, packaging equipment, measuring devices, sliding fixtures, and other applications requiring smooth linear movement along a hardened shaft.
DLY supplies standard LMH...UU models and extended LMH...LUU models. The standard type is used where installation space is limited, while the extended type provides a longer bearing body for improved guiding stability under longer stroke or higher moment conditions.
Product Series
LMH...UU standard flange linear bearing and LMH...LUU long flange linear bearing.
Shaft Diameters
Available for 6, 8, 10, 12, 13, 16, 20, 25, and 30 mm round shafts.
Mounting Style
H-type flange body with mounting holes for direct fixing to plates or carriage structures.
Typical Use
Compact linear sliding systems using round linear shafts and low-friction ball-guided motion.
What Makes the H Flange Structure Useful?
The H flange structure gives the linear bearing a defined mounting surface. This is useful when the bearing needs to be installed on a moving plate or fixed bracket and the shaft passes through the bearing bore. The flange helps simplify assembly because the bearing position can be controlled by the mounting holes rather than by an additional bearing seat.
The standard LMH...UU series is suitable for compact mechanisms where the bearing only needs a short guiding length. The LMH...LUU series uses a longer bearing body, which increases contact length along the shaft and can improve sliding stability where the moving part is longer, the load is offset, or the stroke requires better guidance.
For best service life, the bearing should work with a properly hardened and ground linear shaft. If the shaft is too soft, rough, bent, or poorly aligned, the bearing may become noisy, tight, or wear faster than expected. DLY can supply matching linear shafts and related linear motion components for complete shaft-based sliding assemblies.
Standard and Extended Model Options
The model is selected according to the shaft diameter, installation length, flange size, and load requirement. The table below converts the main product drawing information into readable text to make model comparison easier during selection.
| Model | Type | Shaft dia. dr (mm) | Outer dia. D (mm) | Length L (mm) | Flange dia. D1 (mm) | Weight (g) | Ball circuit |
|---|---|---|---|---|---|---|---|
| LMH6UU | Standard | 6 | 12 | 19 | 28 | 21 | 4 |
| LMH8UU | Standard | 8 | 15 | 24 | 32 | 33 | 4 |
| LMH10UU | Standard | 10 | 19 | 29 | 40 | 64 | 4 |
| LMH12UU | Standard | 12 | 21 | 30 | 42 | 68 | 4 |
| LMH13UU | Standard | 13 | 23 | 32 | 43 | 81 | 4 |
| LMH16UU | Standard | 16 | 28 | 37 | 48 | 112 | 5 |
| LMH20UU | Standard | 20 | 32 | 42 | 54 | 167 | 5 |
| LMH25UU | Standard | 25 | 40 | 59 | 62 | 325 | 6 |
| LMH30UU | Standard | 30 | 45 | 64 | 74 | 388 | 6 |
| Model | Type | Shaft dia. dr (mm) | Outer dia. D (mm) | Length L (mm) | Flange dia. D1 (mm) | Weight (g) | Ball circuit |
|---|---|---|---|---|---|---|---|
| LMH6LUU | Extended | 6 | 12 | 35 | 28 | 27 | 4 |
| LMH8LUU | Extended | 8 | 15 | 45 | 32 | 46 | 4 |
| LMH10LUU | Extended | 10 | 19 | 55 | 40 | 91 | 4 |
| LMH12LUU | Extended | 12 | 21 | 57 | 42 | 92 | 4 |
| LMH13LUU | Extended | 13 | 23 | 61 | 43 | 117 | 4 |
| LMH16LUU | Extended | 16 | 28 | 70 | 48 | 165 | 5 |
| LMH20LUU | Extended | 20 | 32 | 80 | 54 | 247 | 5 |
| LMH25LUU | Extended | 25 | 40 | 112 | 62 | 500 | 6 |
| LMH30LUU | Extended | 30 | 45 | 123 | 74 | 583 | 6 |
Mounting Dimensions and Load Rating Reference
Mounting dimensions are important because the flange bearing is usually fixed directly to the moving or stationary structure. The hole size, flange width, and load rating need to match the actual plate design and shaft layout.
| Model | W (mm) | H (mm) | A (mm) | F (mm) | Mounting Hole | Dynamic Load C (N) | Static Load Co (N) |
|---|---|---|---|---|---|---|---|
| LMH6UU | 18 | 5 | 20 | - | 3.4×6.5×3.3 | 21 | 27 |
| LMH8UU | 21 | 5 | 24 | - | 3.4×6.5×3.3 | 27 | 41 |
| LMH10UU | 25 | 6 | 29 | - | 4.5×8×4.4 | 38 | 56 |
| LMH12UU | 27 | 6 | 32 | - | 4.5×8×4.4 | 42 | 61 |
| LMH13UU | 29 | 6 | 33 | - | 4.5×8×4.4 | 52 | 79 |
| LMH16UU | 34 | 6 | 31 | 22 | 4.5×8×4.4 | 79 | 120 |
| LMH20UU | 38 | 8 | 36 | 24 | 5.5×9.5×5.4 | 88 | 140 |
| LMH25UU | 46 | 8 | 40 | 32 | 5.5×9.5×5.4 | 100 | 160 |
| LMH30UU | 51 | 10 | 49 | 35 | 6.6×11×6.5 | 160 | 280 |
Note: The values above are for model comparison and preliminary selection. Final selection can be confirmed according to shaft material, installation accuracy, load direction, lubrication, and working environment.
Product Drawing and Specification Images
The flange H linear bearing series includes both standard and extended structures. The specification images below show the model table, dimensional drawing, mounting hole layout, and basic load rating information.


Where This Flange H Linear Bearing Slide Is Used
This flange H linear bearing aluminum slide is commonly used in compact shaft-guided systems. It is suitable for moving plates, light-duty carriage units, small automation fixtures, testing equipment, packaging machinery, printing equipment, and general mechanical sliding structures.
In many designs, two shafts are installed in parallel and two or four flange linear bearings are fixed to the moving plate. This arrangement can provide a simple and economical linear guide structure when the load is moderate and the required accuracy is not as demanding as a profiled linear guideway.
For higher rigidity, heavy load, or long-stroke applications, the shaft support method becomes important. The bearing may be used together with supported shafts, end supports, or customized mounting plates depending on the equipment structure.
How to Select the Right LMH Flange Linear Bearing
| Selection Item | What to Confirm | Why It Matters |
|---|---|---|
| Shaft diameter | Choose LMH6, LMH8, LMH10, LMH12, LMH13, LMH16, LMH20, LMH25, or LMH30 according to the round shaft diameter. | A matched shaft and bearing bore are necessary for smooth sliding and proper clearance. |
| Standard or extended body | Use LMH...UU for compact assemblies and LMH...LUU where longer guidance is preferred. | The longer type can improve motion stability when the moving load has an offset center of gravity. |
| Mounting plate design | Confirm flange width, hole size, hole spacing, and available installation space. | Correct mounting dimensions reduce assembly adjustment and prevent forced installation. |
| Load and stroke | Compare the load direction, moving mass, stroke length, and operating speed with the selected model. | Load, speed, and alignment directly affect running smoothness and service life. |
| Working environment | Confirm dust, chips, moisture, lubrication method, and cleaning frequency. | Poor lubrication or contamination can increase friction and shorten bearing life. |
Ordering Information
For a faster quotation, please provide the required model number, quantity, shaft diameter, standard or extended type, and any special requirements for lubrication, packaging, or matching shafts.
| Product Name | Flange H Linear Bearing Aluminum Slide |
| Model Range | LMH6UU to LMH30UU; LMH6LUU to LMH30LUU |
| Compatible Shaft Diameter | 6 mm to 30 mm |
| Main Function | Low-friction linear guidance on round shafts with direct flange mounting |
| Packaging | Plastic bag with box, carton, wooden case, or customized packaging according to order requirements |
| Delivery | Sample and bulk order delivery time can be confirmed according to model, quantity, and current stock status |
FAQ
Q: What is the difference between LMH...UU and LMH...LUU?
A: LMH...UU is the standard length type. LMH...LUU is the extended type with a longer bearing body. The extended type provides a longer guiding length and is often selected when better sliding stability is needed.
Q: Can this flange H linear bearing be used with any round shaft?
A: It is designed for round linear shafts with matching diameter and suitable surface hardness. A hardened and ground shaft is recommended for smoother motion and longer bearing life.
Q: When should I choose a flange linear bearing instead of a normal linear bearing?
A: A flange linear bearing is easier to mount when the bearing needs to be fixed directly to a plate or carriage. A normal cylindrical linear bearing usually requires a separate housing or block for installation.
Q: Can DLY supply the bearing and shaft together?
A: Yes. DLY can supply flange linear bearings, round linear shafts, supported shafts, shaft supports, and related linear motion components for complete shaft-guided motion assemblies.
Q: What information is needed for a quotation?
A: Please provide the model number, shaft diameter, quantity, standard or extended type, and whether matching shafts or supports are required. Drawings or photos of the installation position are also helpful for confirmation.
Need Help Choosing a Flange H Linear Bearing?
Share your required shaft diameter, stroke, mounting space, load condition, and quantity with DLY. Our team can help confirm whether the standard LMH...UU type or extended LMH...LUU type is more suitable for your linear motion structure.
Hot Tags: flange h linear bearing aluminum slide, China flange h linear bearing aluminum slide manufacturers, suppliers, factory, linear guide slider, linear motion slider, slider linear, Linear Bearing Series Aluminum Slides, linear bearing slider, Flange Square Linear Bearing Aluminum Slide

