How Accurate Is a Ball Screw in Positioning? Lead Accuracy, Repeatability and System Error

Mar 04, 2026

Leave a message

Claire
Claire
Linear Motion Application Engineer, DLY Automation Specializing in ball screw and linear guideway selection, system integration, and OEM technical support for CNC and automation applications.

The positioning precision of a ball screw cannot be judged from its accuracy grade alone. A C3, C5, or C7 grade mainly describes the manufactured travel accuracy of the screw, but the final position reached by the machine also depends on axial clearance, preload, screw rigidity, support bearings, coupling, guideway alignment, encoder resolution, servo control, temperature, and external load.

For example, a C5 ground ball screw may have a DLY reference lead deviation of approximately ±0.018 mm over 300 mm, but this does not mean that every machine using that screw will achieve ±0.018 mm positioning accuracy. The installed axis may perform better after calibration at some positions or worse because of thermal growth, elastic deformation, backlash, or assembly error.

Direct answer: Ball screw positioning accuracy is the combined result of screw lead accuracy and the complete motion system. For a precision axis, specify positioning accuracy, repeatability, bidirectional lost motion, load, stroke, temperature, and measurement method separately instead of requesting only a "high-precision ball screw."

What Does Ball Screw Positioning Precision Mean?

A ball screw converts rotational motion into linear displacement. If the nominal lead is 10 mm, one complete screw revolution should theoretically move the ball nut by 10 mm.

Commanded linear travel = screw revolutions × nominal lead

In practice, the actual movement differs slightly from the commanded movement. Positioning precision describes how closely the real axis position follows the commanded coordinate under defined test conditions.

Several related terms are often incorrectly combined into one accuracy value:

Performance Term What It Describes Main Influencing Factors
Lead accuracy How closely actual travel follows the specified travel over a defined distance Screw manufacturing, inspection, lead compensation, and temperature
Positioning accuracy Difference between the commanded coordinate and the actual final axis position Lead error, feedback, bearings, rigidity, control, load, alignment, and temperature
Repeatability How consistently the axis returns to the same position during repeated moves Backlash, friction, servo tuning, bearings, preload, and measurement stability
Backlash or lost motion Movement not immediately transmitted when the travel direction reverses Nut clearance, preload, support bearings, coupling, wear, and assembly
Resolution The smallest theoretical command or feedback increment Encoder counts, screw lead, controller interpolation, and feedback scale
Rigidity Resistance to axial displacement when load is applied Screw diameter, nut preload, bearing arrangement, mounting structure, and unsupported length

A machine may have excellent repeatability but still have poor absolute positioning accuracy. It may repeatedly return to the same incorrect coordinate because the accumulated lead error remains consistent.

Lead Accuracy Is the Starting Point

Lead accuracy describes the relationship between screw rotation and actual linear travel. It is one of the first specifications to check when selecting a positioning ball screw.

If a nominal 10 mm lead screw completes 30 revolutions, the commanded travel is 300 mm. If the measured movement is 299.985 mm, the travel deviation at that position is −0.015 mm.

Example:
Commanded travel = 30 × 10 mm = 300 mm
Measured travel = 299.985 mm
Travel deviation = 299.985 − 300 = −0.015 mm

For DLY ground ball screws, practical reference values include:

Accuracy Grade DLY Reference Lead Deviation General Selection Direction
C3 Approximately ±0.008 mm over 300 mm Precision grinders, inspection systems, demanding machine-tool axes, and controlled positioning equipment
C5 Approximately ±0.018 mm over 300 mm Precision CNC equipment, industrial automation, and machine-tool feed systems
C7 Confirm according to the applicable product and accuracy standard General industrial transmission, handling equipment, and economical positioning systems

These figures describe lead deviation over a stated travel distance. Writing only "the accuracy is 0.008 mm" is incomplete because it does not explain whether the value applies over one revolution, 100 mm, 300 mm, or the complete effective stroke.

The exact grade definition, effective thread length, representative travel deviation, fluctuation, and inspection method should be confirmed according to the applicable standard and supplied ball screw specification.

For a more detailed comparison, read What Is the Accuracy of a Ground Ball Screw? C3 and C5 Explained.

Accuracy Grade Is Not the Final Machine Accuracy

The accuracy grade is assigned to the ball screw under specified inspection conditions. Once the screw is installed, additional mechanical and control errors become part of the positioning result.

A practical positioning error budget may include:

  • Residual ball screw lead deviation
  • Axial clearance or reversal error
  • Elastic deformation of the screw shaft
  • Elastic displacement inside the ball nut
  • Axial movement of the fixed-side support bearings
  • Ball nut bracket and machine-table deformation
  • Coupling torsional deformation or loose connection
  • Encoder and control-system error
  • Ball screw thermal expansion
  • Misalignment between the screw and linear guideways
  • Measurement and calibration uncertainty

For a conservative initial estimate, known maximum errors may be added according to their possible directions. A root-sum-square calculation should only be used when the error sources are suitably independent and the statistical assumptions are justified.

Common mistake: Specifying a C3 screw and assuming the assembled machine will automatically achieve C3 positioning accuracy. The machine frame, support bearings, encoder, guideways, temperature control, installation, and calibration must all preserve the benefit of the selected screw grade.

Backlash Mainly Appears When Direction Reverses

Axial clearance does not normally create the same error during continuous travel in one unchanged direction. Its effect becomes most visible when the screw reverses direction or when the axial load changes direction.

During reversal, the motor may begin rotating before the table responds. This delay is often described as backlash, reversal error, or lost motion.

Possible sources include:

  • Clearance between the screw shaft, balls, and nut raceways
  • Insufficient or lost nut preload
  • Axial play in the fixed-side support bearings
  • Loose bearing locknut
  • Loose ball nut bracket
  • Coupling clearance or loose clamping screws
  • Wear in the screw, nut, bearings, or mounting components
  • Elastic deformation under reversing load

A preloaded nut can reduce axial clearance and improve reversing rigidity. It does not correct the manufactured lead deviation of the screw shaft. Increasing preload cannot convert a C5 lead accuracy into C3.

Excessive preload can also increase running torque, heat generation, motor demand, lubrication sensitivity, and wear. The preload should be selected according to the required rigidity, reversing load, speed, duty cycle, and allowable temperature rise.

Resolution Is Not the Same as Accuracy

A motor encoder and controller may command extremely small movement increments, but this does not prove that the mechanical axis can physically reach those increments with the same accuracy.

The theoretical linear command increment can be estimated using:

Theoretical linear increment = ball screw lead ÷ effective encoder counts per revolution

For example, a 10 mm lead ball screw with 10,000 effective counts per screw revolution has a theoretical command increment of:

10 mm ÷ 10,000 = 0.001 mm = 1 μm

This 1 μm value is a theoretical control or feedback increment. It does not mean that the axis has 1 μm positioning accuracy. Mechanical backlash, lead deviation, servo behavior, friction, rigidity, temperature, and measurement uncertainty remain.

A smaller ball screw lead can improve the theoretical linear increment for the same encoder. It may also increase mechanical advantage. However, a smaller lead does not automatically have a better manufactured accuracy grade.

A 5 mm lead C7 screw is not necessarily more accurate than a 10 mm lead C5 screw. Lead size and lead accuracy grade are separate specifications.

Axial Rigidity Changes the Position Under Load

Even when there is no mechanical clearance, an axis can move slightly because its components deform elastically under axial load.

The approximate elastic displacement of a component can be expressed as:

δ = F ÷ K

Where:

  • δ = elastic displacement
  • F = applied axial load
  • K = axial rigidity

If a ball screw assembly has an effective axial rigidity of 200 N/μm and the operating load changes by 1,000 N, the corresponding elastic displacement is approximately:

1,000 N ÷ 200 N/μm = 5 μm

The complete feed-axis rigidity is lower than the rigidity of its strongest individual component because the screw shaft, ball nut, support bearings, nut bracket, table, and machine base all deform.

Factors affecting axial rigidity include:

  • Screw root diameter
  • Distance between the ball nut and fixed support
  • Ball nut structure and preload
  • Fixed-side bearing arrangement and preload
  • Nut bracket and table stiffness
  • Mounting-bolt and locating-surface rigidity

This is why positioning accuracy should be tested under a load representative of the real machine whenever load-related displacement is important.

Thermal Expansion Can Exceed the Catalog Lead Error

A steel ball screw becomes longer as its temperature rises. Heat may come from nut preload, high rotational speed, support bearings, seals, lubricant behavior, the motor, or the surrounding environment.

The approximate thermal growth can be estimated using:

ΔL = α × L × ΔT

Using an approximate steel thermal expansion coefficient of 11.5 × 10−6/°C, a 500 mm screw section experiencing a 5°C temperature increase may expand by:

ΔL = 11.5 × 10−6 × 500 × 5
ΔL ≈ 0.0288 mm = 28.8 μm

This theoretical thermal growth is already larger than the DLY C5 reference lead deviation of ±18 μm over 300 mm. The values describe different conditions, but the comparison shows why selecting a higher screw grade alone cannot guarantee stable precision after the machine heats up.

A precision axis may require:

  • A controlled warm-up cycle
  • Stable ambient temperature
  • Lubrication selected to limit heat generation
  • Temperature monitoring
  • Ball screw cooling where justified
  • Controller-based lead or temperature compensation
  • Direct linear position feedback
  • An engineered fixed-fixed or pretensioned support arrangement where appropriate

How Support Bearings Affect Positioning

The fixed-side support bearings establish the axial reference of the ball screw. Axial movement in this bearing stack directly affects the table position when the load or direction changes.

Common support-related errors include:

  • Incorrect angular-contact bearing orientation
  • Insufficient or excessive bearing preload
  • A loose precision locknut
  • Incomplete contact between the bearing and shaft shoulder
  • Contamination behind a spacer or bearing ring
  • Shaft-end runout or poor concentricity
  • Support housing movement on the mounting surface

A high-accuracy ball screw installed with low-rigidity or incorrectly assembled support bearings may show poor reversal performance even when the ball nut has almost no axial clearance.

Alignment with the Linear Guideway Is Essential

The linear guideways define the table's travel path. The ball screw should transmit axial force along that path without pulling the table sideways.

If the screw axis is not parallel to the guideway path, the ball nut and support bearings are forced to absorb radial or moment loads that they were not intended to carry.

Possible results include:

  • Changing running torque over the stroke
  • Position-dependent repeatability
  • Higher motor current
  • Local heat generation
  • Uneven ball loading
  • Premature wear of the nut and support bearings

The nut bracket and support units should be aligned to the established guideway path. The ball screw should not be used to pull misaligned guideways or an inaccurate mounting base into position.

For installation guidance, read Ball Screw Parallelism: How to Align a Ball Screw During Installation.

Rotary Feedback and Direct Linear Feedback Are Different

With a motor-mounted rotary encoder, the controller calculates table position from motor rotation and nominal ball screw lead. Errors between the motor and table may remain outside the direct measurement loop.

These may include:

  • Ball screw lead deviation
  • Backlash and bearing movement
  • Coupling deformation
  • Screw thermal growth
  • Mechanical elastic deformation

A direct linear encoder measures the actual table position along the axis. In a properly designed full closed-loop system, it can correct many errors between the drive motor and the moving table.

Direct feedback does not eliminate mechanical binding, excessive preload, unstable friction, guideway misalignment, or structural deformation. These problems must still be corrected mechanically.

Example: Why a 1 μm Command Does Not Equal 1 μm Accuracy

Consider a 500 mm positioning axis with:

  • 10 mm ball screw lead
  • 10,000 effective encoder counts per screw revolution
  • C5 ground ball screw
  • 5°C screw temperature increase
  • 1,000 N change in axial load
  • Effective feed-axis rigidity of 200 N/μm
Item Illustrative Value Meaning
Theoretical encoder increment 1 μm Smallest calculated command increment, not guaranteed physical accuracy
DLY C5 reference lead deviation Approximately ±18 μm/300 mm Manufactured travel-deviation reference over the stated distance
Thermal growth over 500 mm at +5°C Approximately 28.8 μm Possible screw-length change before considering constraints or compensation
Elastic displacement under 1,000 N load change Approximately 5 μm Load-related movement based on the assumed effective rigidity

These values should not simply be added and declared as the final machine error. Some may vary with position, direction, load, temperature, calibration, or feedback method.

The example demonstrates the main point: a controller capable of commanding a 1 μm increment does not make the complete axis accurate to 1 μm.

How to Measure Ball Screw Positioning Performance

The measurement method should match the characteristic being specified.

Characteristic Suitable Measurement Direction Important Test Conditions
Ball screw lead accuracy Dedicated lead-measuring equipment or manufacturer inspection system Defined reference travel, effective thread length, temperature, and grade standard
Complete-axis positioning accuracy Laser interferometer or calibrated linear measurement system Multiple positions, travel directions, warm-up condition, load, and ambient temperature
Repeatability Repeated approach to the same positions using an independent position reference Repeat count, approach direction, speed, load, dwell, and temperature stability
Backlash or reversal error Dial indicator, linear encoder, or laser measurement during direction reversal Small controlled moves from both directions and stable mounting
Axial rigidity Controlled axial load with displacement measurement Load position, bearing arrangement, screw position, and complete structural stiffness
Thermal drift Position measurement combined with screw, bearing, motor, and ambient temperature records Complete warm-up, operating, cooling, and restart cycle

Do not evaluate a precision axis from one measurement point. Positioning errors may change along the stroke because of accumulated lead deviation, local alignment error, screw temperature distribution, or structural deformation.

How to Select the Required Ball Screw Accuracy

The correct accuracy grade should be selected from the machine's complete error budget rather than from the application name alone.

Selection Condition C7 May Be Suitable Consider Ground C5 Consider Ground C3
Application direction General automation, transport, handling, and economical CNC transmission Precision CNC, machine-tool feed, and controlled industrial positioning Precision grinding, inspection, and demanding positioning axes
Travel-error requirement Moderate positioning requirement or controller compensation available Reduced accumulated lead error required Tighter lead control required over the specified stroke
Feedback Motor encoder may be sufficient Suitable rotary feedback or direct scale according to the error budget High-resolution feedback and calibrated measurement normally required to preserve the benefit
Temperature control Normal industrial variation is acceptable Warm-up or basic compensation may be necessary Temperature should be controlled, measured, or compensated
Cost and feasibility Economical general-purpose choice Practical precision-cost balance for many machines Use when the tighter grade is technically justified

C5 should not be treated as a low-accuracy option. For many CNC and automation axes, it provides a practical balance between travel accuracy, availability, manufacturing feasibility, and cost.

C3 should be selected when the error budget demonstrates that its tighter lead control is necessary and when the machine structure, bearings, measurement system, temperature control, and assembly process can preserve that advantage.

Information Required Before Selecting a Precision Ball Screw

To select a suitable ball screw, provide more than the requested accuracy grade.

  • Required absolute positioning accuracy
  • Required unidirectional and bidirectional repeatability
  • Maximum acceptable backlash or lost motion
  • Effective stroke and total screw length
  • Screw diameter and preferred lead
  • Horizontal, vertical, or inclined installation
  • Moving mass, axial load, and process force
  • Maximum linear speed and acceleration
  • Duty cycle and expected service life
  • Nut type and preload requirement
  • Support-bearing arrangement
  • Motor, coupling, and encoder information
  • Operating and ambient temperature range
  • Whether a direct linear encoder or software compensation is used
  • Required inspection report and acceptance method
  • Shaft-end machining and assembly drawing

DLY supplies cold-rolled and precision-ground ball screws for CNC machines, automation equipment, linear modules, machine tools, and customized positioning systems.

Depending on the model and project, available options include C7 rolled ball screws, C5 and C3 ground ball screws, different nut structures, preload requirements, customized lengths, support units, couplings, and shaft-end machining.

For a demanding C3 or C5 order, confirm whether the requirement is only a grade declaration or an individual lead-error inspection report for the supplied screw.

Common Ball Screw Accuracy Mistakes

  • Describing accuracy without stating the travel length
  • Treating encoder resolution as machine positioning accuracy
  • Assuming a smaller lead automatically has a better accuracy grade
  • Confusing repeatability with absolute positioning accuracy
  • Assuming preload corrects screw lead error
  • Checking the ball nut while ignoring the support bearings and coupling
  • Installing a precision screw before aligning the guideways
  • Ignoring elastic deformation under working load
  • Ignoring screw temperature and machine warm-up
  • Selecting C3 when the machine structure cannot preserve C3 performance
  • Testing only from one direction and overlooking reversal error
  • Measuring at only one position instead of across the working stroke

Conclusion

The positioning precision of a ball screw is not one isolated catalog number. Lead accuracy determines how closely the nut follows the specified travel, while backlash, repeatability, rigidity, support bearings, alignment, temperature, encoder feedback, and servo control determine the final performance of the installed axis.

A DLY C5 ground ball screw may provide a reference lead deviation of approximately ±0.018 mm over 300 mm, while C3 may provide approximately ±0.008 mm over 300 mm. These values should be treated as ball screw lead-accuracy references-not guaranteed complete-machine positioning accuracy.

The correct selection process begins with defining the machine's positioning accuracy, repeatability, backlash, stroke, load, speed, temperature, feedback, and measurement requirements. The ball screw grade can then be selected as one part of the complete positioning-error budget.

Need Help Selecting a Ball Screw Accuracy Grade?

Send DLY your required positioning accuracy, repeatability, backlash, stroke, screw length, load, speed, acceleration, temperature range, feedback method, support arrangement, and shaft-end drawing. We can help review the ball screw grade, diameter, lead, nut type, preload, support units, and machining requirements.

Email: export@dlybearing.com   

Website: www.deliyalinearmotion.com

← Back to DLY Blog

Send Inquiry