The DLY SFU1610-3/2 ball screw is a standard flanged single-nut ball screw with a 16 mm nominal shaft diameter and 10 mm lead. Each screw revolution produces 10 mm of linear travel, making it suitable for compact axes that require faster movement than a smaller-lead screw at the same rotational speed.
Standard supply uses an S55C rolled screw shaft, a 20CrMo ball nut and C7 accuracy. C5 ground accuracy, custom screw length, right-hand or left-hand thread and drawing-based end machining are available according to project requirements.
What SFU1610 Means
| Model Code | Meaning | SFU1610-3/2 |
|---|---|---|
| SFU | Standard flanged single-nut series | Flanged single ball nut |
| 16 | Nominal screw shaft diameter | 16 mm |
| 10 | Linear travel per screw revolution | 10 mm |
| 3/2 | Catalog circuit configuration designation | Catalog number of circuits: 3 |
SFU1610 Ball Screw Dimensions
The following dimensions refer to the standard SFU1610-3/2 ball nut. Match the dimension symbols with the SFU drawing before machining the nut holder or surrounding machine components.
| Model | d | l | Da | D | A | B | L | W | X | H | Q | N |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SFU1610-3/2 | 16 | 10 | 3.175 | 28 | 48 | 10 | 47 | 38 | 5.5 | 40 | M6 | 3 |
Dimension unit: mm. d = nominal diameter; l = lead; Da = ball diameter; D = nut outside diameter; A = flange diameter; B = flange thickness; L = nut length; W = flange width; X = mounting-hole diameter; H = mounting-hole center dimension; Q = mounting thread; N = number of ball circuits.

SFU1610 Ball Screw Load Ratings
| Performance Item | Catalog Value | Converted Value | Use in Selection |
|---|---|---|---|
| Dynamic load rating Ca | 721 kgf | Approx. 7.07 kN | Reference value used in nominal fatigue-life calculations |
| Static load rating Coa | 1249 kgf | Approx. 12.25 kN | Reference rating for stationary or peak axial loading |
| Axial stiffness K | 15 kgf/μm | Approx. 147.1 N/μm | Reference elastic resistance in the axial direction |
The kN and N/μm values are approximate conversions from the catalog kgf data. Rated load is not the same as the recommended continuous working load. Actual life depends on axial load, speed, acceleration, lubrication, alignment and duty cycle.
What the 10mm Lead Changes
The SFU1610 nut travels 10 mm for every complete revolution of the screw. At 1000 rpm, the theoretical linear travel rate is 10,000 mm/min before considering acceleration, stroke limits and critical-speed restrictions.
Compared with a 16 mm ball screw using a 4 or 5 mm lead, SFU1610 produces more linear travel at the same motor speed. However, the larger lead also reduces the mechanical advantage and produces more linear movement for each motor increment.
SFU1610 Materials and Accuracy
| Item | Standard Supply | Optional Supply |
|---|---|---|
| Screw shaft | S55C | Special requirements subject to confirmation |
| Ball nut | 20CrMo | Special requirements subject to confirmation |
| Manufacturing method | Cold rolled | Precision ground |
| Accuracy grade | C7 | C5 |
| Thread direction | Right-hand | Left-hand subject to order confirmation |
| Nut structure | Standard flanged single nut | Contact DLY for other nut structures |
SFU1610 Ball Screw FAQ
Q: How fast does an SFU1610 ball screw move at 1500 rpm?
A: With a 10 mm lead, the theoretical linear travel rate is 15,000 mm/min at 1500 rpm. Actual permissible speed must also satisfy the screw's critical-speed, support and acceleration limits.
Q: Can SFU1610 replace an SFU1605 ball screw?
A: It is not normally a direct replacement. Both use a 16 mm nominal diameter, but SFU1610 travels 10 mm per revolution while SFU1605 travels 5 mm. The motor speed, torque, positioning resolution, nut length and machine control settings must be checked.
Q: How much travel does SFU1610 produce in 100 motor revolutions?
A: A 10 mm lead produces 1000 mm of theoretical linear travel in 100 screw revolutions, assuming the motor and screw are connected at a 1:1 ratio.
Q: Is SFU1610 suitable for a long travel axis?
A: Suitability depends on total screw length, rotational speed, support arrangement and axial load. For longer screws, critical speed and shaft deflection should be calculated before the finished length is confirmed.
Q: Can DLY supply SFU1610 with the motor coupling and supports?
A: Yes. Matching support units and a coupling can be quoted with the ball screw. Provide the motor-shaft diameter, support-unit model and shaft-end drawing to confirm compatibility.
Request an SFU1610 Ball Screw Quote
Send the required screw length, effective stroke, quantity, accuracy grade, working speed, support-unit model and shaft-end drawing. DLY will confirm the SFU1610-3/2 specification before quotation.
Contact DLYHot Tags: SFU1610 Ball Screw, China SFU1610 Ball Screw manufacturers, suppliers, factory, brass ball screw, ballscrews, ball screw coupler, star ball screw, 3000mm ball screw, ball screw drive

